Effective December 3, NetApp adopts Microsoft’s Business-to-Customer (B2C) identity management to simplify and provide secure access to NetApp resources.
For accounts that did not pre-register (prior to Dec 3), access to your NetApp data may take up to 1 hour as your legacy NSS ID is synchronized to the new B2C identity.
To learn more, read the FAQ and watch the video.
Need assistance? Complete this form and select “Registration Issue” as the Feedback Category.

ONTAP Discussions

Unable to boo the Netapp storage FAS3240 PANIC: sanown: not enough filer table entries in SK pro

TOPHAN

SP MUNC1Netapp1-a> system console
User naroot has an active console session.
Would you like to disconnect that session, and start yours [y/n]? y
Type Ctrl-D to exit.

+++++++++++++++++++


Boot Loader version 3.6
Copyright (C) 2000-2003 Broadcom Corporation.
Portions Copyright (C) 2002-2014 NetApp, Inc. All Rights Reserved.

CPU Type: Intel(R) Xeon(R) CPU L5410 @ 2.33GHz


Starting AUTOBOOT press Ctrl-C to abort...
Loading X86_64/freebsd/image2/kernel:0x100000/8455008 0x910360/1278312 Entry at 0x80158990
Loading X86_64/freebsd/image2/platform.ko:0xa49000/655152 0xb97c40/694752 0xae8f40/39656 0xc41620/43152 0xaf2a28/86316 0xb07b54/63858 0xb174e0/140640 0xc4beb0/159120 0xb39a40/2024 0xc72c40/6072 0xb3a228/304 0xc743f8/912 0xb3a358/1680 0xc74788/5040 0xb3a9e8/960 0xc75b38/2880 0xb3ada8/184 0xc76678/552 0xb3ae60/448 0xb6f000/12918 0xb97b53/237 0xb72278/84120 0xb86b10/69699
Starting program at 0x80158990
NetApp Data ONTAP 8.1.4P4 7-Mode
Copyright (C) 1992-2014 NetApp.
All rights reserved.
md1.uzip: 25536 x 16384 blocks
md2.uzip: 5760 x 16384 blocks
*******************************
* *
* Press Ctrl-C for Boot Menu. *
* *
*******************************
Chelsio T3 RDMA Driver - version 0.1
Ipspace "iwarp-ipspace" created
Jun 26 12:58:43 [localhost:fci.adapter.link.online:info]: Fibre Channel adapter 0c link online.
Jun 26 12:58:43 [localhost:fci.nserr.noDevices:error]: The Fibre Channel fabric attached to adapter 0c reports the presence of no Fibre Channel devices.
Jun 26 12:58:43 [localhost:fci.adapter.link.online:info]: Fibre Channel adapter 0d link online.
Jun 26 12:58:43 [localhost:fci.nserr.noDevices:error]: The Fibre Channel fabric attached to adapter 0d reports the presence of no Fibre Channel devices.
Cluster monitor: warning: firmware partner-sysid variable is not set
Jun 26 12:58:52 [localhost:diskown.isEnabled:info]: software ownership has been enabled for this system
Jun 26 12:58:52 [loPANIC : sanown: not enough filer table entries
version: 8.1.4P4: Sat Jun 28 01:52:51 PDT 2014
conf : x86_64
cpuid = 0
Uptime: 46s

PANIC: sanown: not enough filer table entries in SK process sanown_io on release 8.1.4P4 on Tue Jun 26 12:58:52 GMT 2018

version: 8.1.4P4: Sat Jun 28 01:52:51 PDT 2014
compile flags: x86_64
Writing panic info to HA mailbox disks.
HA: current time (in sk_msecs) 22601 (in sk_cycles) 251767824098
DUMPCORE: START
Raid assimilation incomplete

DUMPCORE: END -- coredump *NOT* written.
Dumpcore failed
coredump: primary dumper failed -1.
coredump: trying secondary dumper...
no tftp server ip specified
netdump: no targets available to dump
coredump: secondary dumper failed -1.
Logging shutdown event to the SP...
System halting...
cpu_reset called on cpu#0

Phoenix TrustedCore(tm) Server
Copyright 1985-2006 Phoenix Technologies Ltd.
All Rights Reserved
BIOS version: 5.3.0
Portions Copyright (c) 2007-2014 NetApp, Inc. All Rights Reserved

CPU = 1 Processors Detected, Cores per Processor = 4
Intel(R) Xeon(R) CPU L5410 @ 2.33GHz
Testing RAM
512MB RAM tested
8192MB RAM installed
6144 KB L2 Cache
System BIOS shadowed
USB 2.0: MICRON eUSB DISK
BIOS is scanning PCI Option ROMs, this may take a few seconds...
+++++++++++++++++++


Boot Loader version 3.6
Copyright (C) 2000-2003 Broadcom Corporation.
Portions Copyright (C) 2002-2014 NetApp, Inc. All Rights Reserved.

CPU Type: Intel(R) Xeon(R) CPU L5410 @ 2.33GHz
LOADER-A>

 

============================================================================

 

LOADER-A> set-defaults
LOADER-A> boot_ontap
Loading X86_64/freebsd/image2/kernel:0x100000/8455008 0x910360/1278312 Entry at 0x80158990
Loading X86_64/freebsd/image2/platform.ko:0xa49000/655152 0xb97c40/694752 0xae8f40/39656 0xc41620/43152 0xaf2a28/86316 0xb07b54/63858 0xb174e0/140640 0xc4beb0/159120 0xb39a40/2024 0xc72c40/6072 0xb3a228/304 0xc743f8/912 0xb3a358/1680 0xc74788/5040 0xb3a9e8/960 0xc75b38/2880 0xb3ada8/184 0xc76678/552 0xb3ae60/448 0xb6f000/12918 0xb97b53/237 0xb72278/84120 0xb86b10/69699
Starting program at 0x80158990
NetApp Data ONTAP 8.1.4P4 7-Mode
Copyright (C) 1992-2014 NetApp.
All rights reserved.
md1.uzip: 25536 x 16384 bl^Cocks
md2.uzip: 5760 x 16384 blocks
*******************************
* *
* Press Ctrl-C for Boot Menu. *
* *
*******************************
^CBoot Menu will be available.
^C^C^C^C^C^C^C^C^C^C^C^C
Please choose one of the following:

(1) Normal Boot.
(2) Boot without /etc/rc.
(3) Change password.
(4) Clean configuration and initialize all disks.
(5) Maintenance mode boot.
(6) Update flash from backup config.
(7) Install new software first.
(8) Reboot node.
Selection (1-8)? 5
Chelsio T3 RDMA Driver - version 0.1
Ipspace "iwarp-ipspace" created
Jun 26 13:01:19 [localhost:fci.adapter.link.online:info]: Fibre Channel adapter 0c link online.
Jun 26 13:01:19 [localhost:fci.nserr.noDevices:error]: The Fibre Channel fabric attached to adapter 0c reports the presence of no Fibre Channel devices.
Jun 26 13:01:19 [localhost:fci.adapter.link.online:info]: Fibre Channel adapter 0d link online.
Jun 26 13:01:19 [localhost:fci.nserr.noDevices:error]: The Fibre Channel fabric attached to adapter 0d reports the presence of no Fibre Channel devices.
Cluster monitor: warning: firmware partner-sysid variable is not set
Jun 26 13:01:28 [localhost:diskown.isEnabled:info]: software ownership has been enabled for this system
Jun 2PANIC : sanown: not enough filer table entries
version: 8.1.4P4: Sat Jun 28 01:52:51 PDT 2014
conf : x86_64
cpuid = 0
Uptime: 49s

PANIC: sanown: not enough filer table entries in SK process sanown_io on release 8.1.4P4 on Tue Jun 26 13:01:28 GMT 2018

version: 8.1.4P4: Sat Jun 28 01:52:51 PDT 2014
compile flags: x86_64
Writing panic info to HA mailbox disks.
HA: current time (in sk_msecs) 21427 (in sk_cycles) 348330384325
DUMPCORE: START
Raid assimilation incomplete

DUMPCORE: END -- coredump *NOT* written.
Dumpcore failed
coredump: primary dumper failed -1.
coredump: trying secondary dumper...
no tftp server ip specified
netdump: no targets available to dump
coredump: secondary dumper failed -1.
Logging shutdown event to the SP...
System halting...
cpu_reset called on cpu#0

Phoenix TrustedCore(tm) Server
Copyright 1985-2006 Phoenix Technologies Ltd.
All Rights Reserved
BIOS version: 5.3.0
Portions Copyright (c) 2007-2014 NetApp, Inc. All Rights Reserved

CPU = 1 Processors Detected, Cores per Processor = 4
Intel(R) Xeon(R) CPU L5410 @ 2.33GHz
Testing RAM
512MB RAM tested
8192MB RAM installed
6144 KB L2 Cache
System BIOS shadowed
USB 2.0: MICRON eUSB DISK
BIOS is scanning PCI Option ROMs, this may take a few seconds...
+++++++++++++++++++


Boot Loader version 3.6
Copyright (C) 2000-2003 Broadcom Corporation.
Portions Copyright (C) 2002-2014 NetApp, Inc. All Rights Reserved.

CPU Type: Intel(R) Xeon(R) CPU L5410 @ 2.33GHz
LOADER-A>

 

 

1 REPLY 1

Arnoldo

Did you find a solution for this problem?

Announcements
NetApp on Discord Image

We're on Discord, are you?

Live Chat, Watch Parties, and More!

Explore Banner

Meet Explore, NetApp’s digital sales platform

Engage digitally throughout the sales process, from product discovery to configuration, and handle all your post-purchase needs.

NetApp Insights to Action
I2A Banner
Public