Hello, I have to resize about 400 flexvols, having partially deleted old data. My target is to resize exactly to 97% of used space. Having done the job before on few volumes I used to resize it manually. Now I'm trying to autoresize volumes using volume options space-nearly-full-threshold-percent space-full-threshold-percent autosize-grow-threshold-percent autosize-shrink-threshold-percent but I can't get the volume autosized. Maybe I specified wrong values for the above options, can you help me on how to set them to achieve the 97% of used space? Thank you, Fabrizio
... View more
Hi Team We need some clarification regarding volume capacity values . we're using physical used capacity to compute various metrics. We've observed that for some volumes, the used capacity and physical used capacity values are the same, while for others, they differ. Here are the details from our NetApp system (version 9.13): ``` A250::> volume show -fields size, available, total, used, physical-used vserver volume size available total used physical-used ------- ---------- ------- --------- ------- ------- ------------- A250-01 vol0 151.3GB 72.74GB 143.7GB 70.99GB 68.25GB A250-02 vol0 151.3GB 77.03GB 143.7GB 66.70GB 62.60GB svm1 Lun_1 2.06GB 2.06GB 2.06GB 632KB 632KB svm1 Lun_test_3 10.30GB 10.30GB 10.30GB 692KB 692KB svm1 svm1_root 1GB 970.3MB 972.8MB 2.48MB 7.96MB ``` We've tried to understand the reasons behind these discrepancies but couldn't get a clear explanation. Could you please help us understand this . Thank You!
... View more
Hello All, I'm hoping someone could guide me through how to properly disassociate a Volume from its Application and or completely delete the application and its volume. I am trying to clear out applications from a recently decommissioned FAS2700. It is running on ONTAP 9.13.1. I'm hoping not to completely wipe the system but clear out some volumes. The Web interface doesn't allow me to delete the application or delete the volume from the application. The overview page for the application is blank. It doesn't even allow me to create a new application. I have looked at "Volume delete" fails due to association with an Application - NetApp Knowledge Base but it asks to contact NetApp Support which I do not have access to unfortunately. Thanks
... View more
hi when i am trying to create new lun i got error related no space, after that i am not able to see luns list in ontap system manager, in cli when i use 'lun show' i got output like this 'the lun inventory was not available for the following volumes Reason: Hit the queue threshold flushing new entries' how to make it available all the luns. what steps do I need to take.
... View more
If you vol move a 100TB volume, the first transfer will have a transfer rate of about 160MB/s, but if you try to manually cut over, the transfer rate will be 1MB/s and won't switch after 5 or 6 hours. Has anyone had this experience? This volume is deduplicated and was manually deduplicated before being disabled. 100TB volumes that have never been deduplicated will not experience an incident. Thank you and best regards.
... View more