introduce my environment:
hardware : NETAPP FAS3220 , version : NetApp Release 8.1.3P3 7-Mode:
the following is issue .
when i execute the command ,
cf giveback , notice me , because of the CIFS process is alive, dont agree with me to continute , the command failed.
so that i execute the command cf giveback -f . finished the command -f option,
both of the controller is reboot, what's wrong the controller ? I read many document about FAS3220.
but the dont explain directly , so the command cf giveback -f , will reboot controller ?
See The Solution
It is not expected that the controller performing the giveback will reboot when issuing a cf giveback -f.
Using cf giveback -f can be disruptive as per the article below:
However if you see both nodes reboot there is likely something else going on here.
View solution in original post
Let's walk you through the new & improved Knowledge Base and further enrich your experience with NetApp Products.
Join our Discord Community