Hi folks. We have a 6 node 8200 cluster running 9.7P11 with CN1610 cluster switches. All is well except cluster-switch show only show one of the cluster interconnect switches. If I try an add the missing switch with cluster-switch create I get an IP address not reachable error but I can ping the switch and from the switch I can ping the cluster. network device-discovery show lists both switches. The cluster and node management ports on this cluster are over an ifgrp and the only difference I can see on the switches is the MAC address connecting to the switch management port. Any advice would be great.
Apart from the fact that you don't see one of the switch via system cluster-switch show, is all Cluster LIFs ok? Does event logs show errors on NetApp side related to cluster switch?
how does it look: ::> system health subsystem show ::> system health alert show -monitor cluster-switch -instance ::> system cluster-switch show -snmp-config
Could be the port faulty? Is there a free port to test it? Replacing cable ? (If there are no errors reported from NetApp & Cluster side then, its worth raising a ticket with NetApp and if there is anything that needs clearing out.