ONTAP Discussions
ONTAP Discussions
An Error event on Active/Active Controller filer name Global Status: NonCritical; /vol/name_rdm is full (using or reserving 100% of space and 0% of inodes, using 100% of reserve)
what's the cause of above I am new to NetApp?
it's san architecture
although vol size has been increased.
but some other solution.....
Hi Abhinav,
If possible can you provide the df -h <volume_name >
so that we can get a clear picture
df -h <<vol_name_rdm>>
Filesystem total used avail capacity Mounted on
/vol/<<vol_name_rdm>>/ 900GB 542GB 357GB 60% /vol/<<vol_name_rdm>>/
/vol/<<vol_name_rdm>>/.snapshot 0GB 191GB 0GB ---% /vol/vol_name_rdm/.snapshot
do you have any LUN in that volume
@vijay reddy Yes
can you send snap list volname
Hi Vijay,
I think what you would be suggesting do delete the snap shots which are old and heavy.
but I don't want to go that way.
hi Abhinav,
can you give vol status vol_name_rdm and also vol options vol_name_rdm here please
i wanted to check whether the snaps are tied up with clones
If the lun space reservation is enabled then it takes the exact amount of space from volume for modification of data in the Lun
suppose let us assume that volume of 1 TB and u have created the lun with 200 GB and you enabled the sapce reservation while creating the LUN then it takes 250 GB for the lun and another 250 GB for the space reservation
this may cause the problem
sorry the delay reply