how to check which disk is replaced for the failed drive and the rebuild status of the disk

[SameerKulkarni]

Hello all,

This is my first post on NetApp communicty,

i would like to know the command to check when a disks fails, which disk has replaced the failed one and also the rebuild status of that disk.

Thanks in Advanced.

Cheers,

Sameer

[aborzenkov]

I do not think there is command to see it. You can check logs or previous ASUP.

[SameerKulkarni]

so the only way is to compare old ASUP logs with new one to see which spare has replaced the failed disk ?

[YIshikawa]

If reconstruction is in progress, you can check by 'sysconfig -r'.

if you know when the disk failed, check messages or ems log. It clearly indicate which disk is used for reconstruction.

if you don't you exact date of disk failure, compare ASUP.