So LONG story short, we have a 2240-4 system where the two systems were sharing the disks. We want Controller A to own all disk. I did a initialize and zero on Controller B not realizing that you cannot make changes to Controller A while B is being zeroed. I started the wipe about 2 hours ago but they are 2TB SATA disks so I am sure I have a long time to go.
I tried to add an initiator to an iGroup on Controller A and got this error. I let's me create igroups but not add initiators.
Here is the error:
igroup add: Cluster partner could not be reached, interconnect may be down
Any options here?
OnTap 8.1.1 7-Mode