ONTAP Discussions

lun clone create: A LUN exists at the path

TDUBB1234
12,798 Views

I am getting this error on cloning a flexvol iscsi lun. any idea?

lun clone create /vol/flexvol0/iscsi_vol1 -o noreserve -b /vol/flexvol0/iscsi_vol1_clone clone_flexclone

lun clone create: A LUN exists at the path

17 REPLIES 17

pascalduk
12,717 Views

Looking at the name of your paths I think you have the clone and parent path reversed in your command. It should be:

lun clone create /vol/flexvol0/iscsi_vol1_clone -o noreserve -b /vol/flexvol0/iscsi_vol1 clone_flexclone

BTW, it is iscsi_vol1 the name of your lun? You need to provide the full path including the name of the lun itself as you can't clone a qtree.

TDUBB1234
12,717 Views

it still doesnt work

lun clone create /vol/flexvol0/iscsi_vol0_clone -o noreserve -b /vol/flexvol0/iscsi_vol0 clone_flexclone

lun clone create: No such snapshot

dataontap> df -h

Filesystem               total       used      avail capacity  Mounted on

/vol/vol0/               647MB      190MB      457MB      29%  /vol/vol0/

/vol/vol0/.snapshot      161MB      128MB       33MB      79%  /vol/vol0/.snapshot

/vol/flexvol0/          6216MB       45MB     6170MB       1%  /vol/flexvol0/

/vol/flexvol0/.snapshot     1554MB     1540KB     1552MB       0%  /vol/flexvol0/.snapshot

/vol/iscsi/             8192MB     8112MB       79MB      99%  /vol/iscsi/

/vol/iscsi/.snapshot     2048MB      351MB     1696MB      17%  /vol/iscsi/.snapshot

dataontap> lun show -v

        /vol/flexvol0/iscsi_vol0     3.0g (3224309760)    (r/w, online, mapped)

                Serial#: idWqJ4eE8V32

                Share: none

                Space Reservation: disabled

                Multiprotocol Type: windows_2008

                Maps: iscsi_test=1

                Occupied Size:   39.1m (40992768)    

                Creation Time: Tue Jul 26 05:23:00 GMT 2011

                Cluster Shared Volume Information: 0x0

        /vol/iscsi/iscsi_qtr/iscsi_vol0    7.9g (8488488960)    (r/w, online, mapped)

                Comment: "iscsi test"

                Serial#: idWqJ4eBac0J

                Share: none

                Space Reservation: enabled

                Multiprotocol Type: windows

                Maps: iscsi_test=0

                Occupied Size:  117.9m (123613184)   

                Creation Time: Mon Jul 25 23:51:55 GMT 2011

                Cluster Shared Volume Information: 0x0

mladen_zecevic
12,720 Views

you have to specify a snapshot name that will be used as the base of creating the clone

lun clone create <clone_lunpath> [-o noreserve] -b <parent_lunpath> <parent_snap>

if there are no snapshots for the volume, you can create one.

regards,

Mladen

peter_lehmann
12,720 Views

Looking at the first error message:

lun clone create: A LUN exists at the path

And you lun show -v... then the error message is correct. the LUN already exists!

If you clone a LUN, you need to clone it to a location where no LUN exists.

Peter

pascalduk
12,717 Views

In your original post you used clone_flexclone as a snapshot. You did not specify the snapshot in this example.

TDUBB1234
12,717 Views

i have not created any snapshot. so you are saying in order to clone a lun (not a volume) I need to create a snapshot of the volume first?

snap list shows

dataontap> snap list

Volume vol0

working...

  %/used       %/total  date          name

----------  ----------  ------------  --------

  2% ( 2%)    1% ( 1%)  Jul 26 16:00  hourly.0      

10% ( 8%)    3% ( 2%)  Jul 26 12:00  hourly.1      

16% ( 8%)    5% ( 2%)  Jul 26 08:01  hourly.2      

22% ( 8%)    7% ( 2%)  Jul 26 00:00  nightly.0     

27% ( 8%)    9% ( 2%)  Jul 25 20:00  hourly.3      

31% ( 8%)   11% ( 2%)  Jul 25 16:00  hourly.4      

35% ( 8%)   13% ( 2%)  Jul 25 12:00  hourly.5      

38% ( 8%)   15% ( 2%)  Jul 25 00:00  nightly.1     

Volume flexvol0

working...

  %/used       %/total  date          name

----------  ----------  ------------  --------

  2% ( 2%)    0% ( 0%)  Jul 25 20:00  hourly.0      

  2% ( 0%)    0% ( 0%)  Jul 25 16:00  hourly.1      

  2% ( 0%)    0% ( 0%)  Jul 25 12:00  hourly.2      

  3% ( 0%)    0% ( 0%)  Jul 25 08:00  hourly.3      

  3% ( 0%)    0% ( 0%)  Jul 25 00:00  nightly.0     

  3% ( 0%)    0% ( 0%)  Jul 24 20:00  hourly.4      

  3% ( 0%)    0% ( 0%)  Jul 24 16:00  hourly.5      

  3% ( 0%)    0% ( 0%)  Jul 24 00:00  nightly.1     

TDUBB1234
12,717 Views

ok so looks like I need to create a snapshot of the entire volume before I can do a do a clone of the lun?

I cannot snapshot the lun right? only a volume?

peter_lehmann
12,717 Views

snapshot is ALWAYS the whole volume.

TDUBB1234
12,718 Views

so a lun clone can only be created from a snapshot of a volume and not from the lun itself?

TDUBB1234
11,317 Views

can i restore a lun only and not a whole volume?

I created a lun clone. how do I restore a lun clone but not entire volume?

balbeer
11,317 Views

so, you want to perform a "restore" of a LUN? not a clone, for temporary use?

if the above is what you want, then, the process our products take is called "LCSR" - LUN Clone Split Restore for a LUN type restore/recovery. For this, and if you are doing manual, then first, you do "LUN clone", and then followed by split the clone! This will place the recovered LUN in the same FlexVol as original!!!

TDUBB1234
11,317 Views

k i was able to split the lun clone from the parent lun with

lun clone split start -d /vol/flexvol0/iscsi_vol0_clone

now i have 2 luns occupying the same amount of space. how do i copy this lun over the other one? or restore the data to the original lun?

balbeer
11,317 Views

that was expected! So, what you ahve done is, you had the old lun, and performed a clone, followed by split, this recovered a LUN from a specific snapshot, but now you have two luns! Here, if there recovered LUN has all the data you need, then just destroy the OLD lun whcih is not required!

Obviously you are executing all this manually, if you were to use SnapDrive for example, all you need is using the GUI, right-click and restore a LUN from a specific snapshot. IT will do exactly the above, and it will not retain the old LUN.

Thanks, balbeer

TDUBB1234
11,317 Views

i connected to the new lun via snapdrive but do not see an option to restore from a snapshot.

balbeer
11,318 Views

the reason is, you have been taking snapshots at the storage layer, not using SnapDrive!!!

simuate this:

use snapdrive to create a snapshot, select the drive, right-click, and click on create snapshot

once the snapshot is created, expand the disks, and snapshots, and you will see a snapshot which is NOT greyed, this means it is created usign SnapDrive

right-click on the snapshot you have created using snapdrive, and select restore!

TDUBB1234
9,416 Views

so if i create a lun in the storage layer, i should not use snapdrive to manager that lun and vice versa?

andrc
9,416 Views

Correct, it can be done if you know what you're doing but it's not Best Practice.

Public