need to grow volume that had sis enabled

[seachange03]

I turned sis on a volume to test the deduplication effects a while back.  Now, I have disabled sis on the volume and need to grow it past the sis 1TB limit on my FAS2020.

Even though sis is disabled, I am unable to grow it past that limit.  Any ideas?

TIA

[jayadratha]

Hi! Try undo sis as described here:

https://now.netapp.com/Knowledgebase/solutionarea.asp?id=kb35784

[netappnasadmin]

since you disabled the sis on the volume. enter into priv admin mode & do

undo the sis on the present volume. it will take 2 hrs roughly for undo the de-dupe on the 1 TB

volume.

[seachange03]

Thanks very much for both your answers.  Entered advanced priv mode and successfully performed "sis undo".

Was then able to grow volume past the 1TB sis limit.

[keithsanderson]

Hi

I have a FAS3020 and a Volume that is very close to the 2TB deduplication limit and need to grow the Volume over 2TB.  The problem that I have is that there is not enough free space in the Volume to carry out the sis undo.  Is there any way to increase the Volume size so that I can run sis undo and if not, what are my options?

Thanks.