network route clear caching

[StevenFoo]

We have an issue where we are finding wrong value in the route active-entry.

We have checked our static route configuration there is no such value defined.

How could we remove the stale or wrong value in the network route active-entry show ?

We would not find any command that able to do that?

We are trying to avoid any restart of the controller.

[StevenFoo]

In linux we could use command like ip route flush cache

What is the equivalent method for NetApp Ontap 9.9.1?

[TMACMD]

What’s the output of

 route show

 and 

network interface show

 maybe you have multiple routes? Maybe metrics are incorrect…

[StevenFoo]

Sorry we could not list our IPs to the public forum.

We have check, there is no multiple routes and our metric is all standard 20.

However route active-entry show, there are old records which incorrect and do not appear in the route show. 
The situation how do we clear records in the route active-entry show ??

[paul_stejskal]

If you tab complete there should be a route delete command. However if you are not comfortable we would recommend using a channel of support where you can give that information away more freely, such as opening a case.

[TMACMD]

You can always mask any ip addresses. Just use xxx.xxx for the first two octets. Something may be off.  Wouldn’t be the first time

[StevenFoo]

We have turn off the dynamic routing as per NetApp support instruction. Now it is working.