snapmirror throttle, how can I verify it is used ?

[marlon]

I would like to verify that the throttle setting in snapmirror.conf is being honored.

How can I do this ?

I don't see any indication in the snapmirror log on the mirror destination filer nor in the

output of snapmirror status.

Thanks,

-Marlon

[scottgelb]

"snapmirror status -l" will give the duration and amount of data to calculate the kb/sec throughput of the last transfer.

[enrjfitz1]

Agree with this from "scottgrlb", another way would be to check your bandwidth reports on your ADSL/firewall equipment and see the bandwidth that the NetApp filer is using on the link at specific times.

[SIRTECHIE42]

"If you would like to ensure that your transfer limitations are being adhered to, you can use the netstat -na command and see the individual transfers running over port 10566."

Taken from a kb article ::   https://kb.netapp.com/support/index?page=content&id=1011430

hope this helps!

Brandon