Options
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Mute
- Printer Friendly Page
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
We had a broken disk in our cluster (1.0.5), so I replaced it for a new disk (old disk X343, new disk X426 model). No big deal normally, but this time it's different. After assigning the disk to node 1 it shows status FAILED in the aggregate show:
aggr show-status -aggregate ch_n1_aggr002_FPP
Owner Node:xxxxxxx-001
Aggregate: ch_n1_aggr002_FPP (online, mixed_raid_type, degraded, hybrid) (block checksums)
Plex: /ch_n1_aggr002_FPP/plex0 (online, normal, active, pool0)
RAID Group /ch_n1_aggr002_FPP/plex0/rg0 (degraded, block checksums, raid_dp)
Usable Physical
Position Disk Pool Type RPM Size Size Status
-------- --------------------------- ---- ----- ------ -------- -------- ----------
shared 1.0.4 0 SAS 10000 1.61TB 1.64TB (normal)
shared FAILED - - - 1.61TB 0B (failed)
shared 1.0.6 0 SAS 10000 1.61TB 1.64TB (normal)
shared 1.0.7 0 SAS 10000 1.61TB 1.64TB (normal)
shared 1.0.8 0 SAS 10000 1.61TB 1.64TB (normal)
shared 1.0.9 0 SAS 10000 1.61TB 1.64TB (normal)
shared 1.0.10 0 SAS 10000 1.61TB 1.64TB (normal)
shared 1.0.11 0 SAS 10000 1.61TB 1.64TB (normal)
shared 1.0.12 0 SAS 10000 1.61TB 1.64TB (normal)
shared 1.0.23 0 SAS 10000 1.61TB 1.64TB (normal)
shared 1.0.14 0 SAS 10000 1.61TB 1.64TB (normal)
shared 1.0.13 0 SAS 10000 1.61TB 1.64TB (normal)
shared 1.0.16 0 SAS 10000 1.61TB 1.64TB (normal)
shared 1.0.17 0 SAS 10000 1.61TB 1.64TB (normal)
shared 1.0.18 0 SAS 10000 1.61TB 1.64TB (normal)
shared 1.0.19 0 SAS 10000 1.61TB 1.64TB (normal)
shared 1.0.15 0 SAS 10000 1.61TB 1.64TB (normal)
shared 1.0.21 0 SAS 10000 1.61TB 1.64TB (normal)
shared 1.0.20 0 SAS 10000 1.61TB 1.64TB (normal)
RAID Group /ch_n1_aggr002_FPP/plex0/rg1 (normal, block checksums, raid4) (Storage Pool: ch_n1_n3_sp_gen_001)
Usable Physical
Position Disk Pool Type RPM Size Size Status
-------- --------------------------- ---- ----- ------ -------- -------- ----------
shared 1.0.3 0 SSD - 894.2GB 3.49TB (normal)
shared 1.0.0 0 SSD - 894.2GB 3.49TB (normal)
shared 1.0.2 0 SSD - 894.2GB 3.49TB (normal)
22 entries were displayed.
xxxxxxx-001::> disk show -disk 1.0.5
Disk: 1.0.5
Container Type: shared
Owner/Home: ch-strt-gen-001 / ch-strt-gen-001
DR Home: -
Stack ID/Shelf/Bay: 1 / 0 / 5
LUN: 0
Array: N/A
Vendor: NETAPP
Model: X426_HCBFE1T8A10
Serial Number: 08G6H96Z
UID: 5000CCA0:2C0BCE98:00000000:00000000:00000000:00000000:00000000:00000000:00000000:00000000
BPS: 520
Physical Size: 1.64TB
Position: shared
Checksum Compatibility: block
Aggregate: -
Plex: -
Paths:
LUN Initiator Side Target Side Link
Controller Initiator ID Switch Port Switch Port Acc Use Target Port TPGN Speed I/O KB/s IOPS
------------------ --------- ----- -------------------- -------------------- --- --- ----------------------- ------ ------- ------------ ------------
ch-strt-gen-001 0a 0 N/A N/A AO RDY 5000cca02c0bce9a 34 6 Gb/S 0 0
ch-strt-gen-001 0b 0 N/A N/A AO INU 5000cca02c0bce99 3 12 Gb/S 3 0
ch-strt-gen-003 0a 0 N/A N/A AO RDY 5000cca02c0bce99 3 6 Gb/S 0 0
ch-strt-gen-003 0b 0 N/A N/A AO INU 5000cca02c0bce9a 34 12 Gb/S 1 0
Errors:
-
xxxxxxx-001::> set -privilege advanced
Warning: These advanced commands are potentially dangerous; use them only when directed to do so by NetApp personnel.
Do you want to continue? {y|n}: y
xxxxxxx-001::*> storage disk unfail -disk 1.0.5
Warning: Failed disk "1.0.5" might have aggregate labels and file system data present. In that case, this command will attempt to bring this disk back into the aggregate with which this disk had formerly been associated and preserve
file system data. Are you sure you want to continue with disk unfail? {y|n}: y
Error: command failed: Failed to unfail the disk. Reason: Disk is not currently failed.
I already tried another disk, but same problem.
Is this because it's a different model or something else?
thank for your time
Maurice
Solved! See The Solution
1 ACCEPTED SOLUTION
Maurice-FreeOnes has accepted the solution
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
You have to assign the disk (or partitions in this case) for it to work. Right now, only the disk itself is assigned, not the partitions (same for 02.23):
ISK OWNER POOL SERIAL NUMBER HOME DR HOME CHKSUM
--------- ------------- ----- ------------- ------------- ------------- --------
0b.00.1 ch-strt-gen-001(538016980) Pool0 S3SGNY0M700121 ch-strt-gen-001(538016980) Block PRkey=538016980 UpCnt= 3 duid=5002538B:0970A62, Attachment: Local
0b.05.0 ch-strt-gen-003(538016690) Pool0 S40TNY0K400661 ch-strt-gen-003(538016690) Block PRkey=538016690 UpCnt= 3 duid=5002538B:0843C51, Attachment: Local
0b.05.8 ch-strt-gen-003(538016690) Pool0 S40TNY0K400680 ch-strt-gen-003(538016690) Block PRkey=538016690 UpCnt= 3 duid=5002538B:0843C64, Attachment: Local
0b.05.1 ch-strt-gen-003(538016690) Pool0 S40TNY0K400668 ch-strt-gen-003(538016690) Block PRkey=538016690 UpCnt= 3 duid=5002538B:0843C58, Attachment: Local
0b.05.5 ch-strt-gen-003(538016690) Pool0 S40TNY0K400672 ch-strt-gen-003(538016690) Block PRkey=538016690 UpCnt= 3 duid=5002538B:0843C5C, Attachment: Local
0b.05.6 ch-strt-gen-003(538016690) Pool0 S40TNY0K400653 ch-strt-gen-003(538016690) Block PRkey=538016690 UpCnt= 3 duid=5002538B:0843C49, Attachment: Local
0b.05.10 ch-strt-gen-003(538016690) Pool0 S40TNY0K400654 ch-strt-gen-003(538016690) Block PRkey=538016690 UpCnt= 3 duid=5002538B:0843C4A, Attachment: Local
0b.05.2 ch-strt-gen-003(538016690) Pool0 S40TNY0K400864 ch-strt-gen-003(538016690) Block PRkey=538016690 UpCnt= 3 duid=5002538B:0843FEA, Attachment: Local
0b.05.9 ch-strt-gen-003(538016690) Pool0 S40TNY0K400685 ch-strt-gen-003(538016690) Block PRkey=538016690 UpCnt= 3 duid=5002538B:0843C69, Attachment: Local
0b.05.4 ch-strt-gen-003(538016690) Pool0 S40TNY0K400626 ch-strt-gen-003(538016690) Block PRkey=538016690 UpCnt= 3 duid=5002538B:0843C2E, Attachment: Local
0b.05.11 ch-strt-gen-003(538016690) Pool0 S40TNY0K500202 ch-strt-gen-003(538016690) Block PRkey=538016690 UpCnt= 1 duid=5002538B:08508D1, Attachment: Local
0b.05.3 ch-strt-gen-003(538016690) Pool0 S40TNY0K400636 ch-strt-gen-003(538016690) Block PRkey=538016690 UpCnt= 3 duid=5002538B:0843C38, Attachment: Local
0b.05.7 ch-strt-gen-003(538016690) Pool0 S40TNY0K400839 ch-strt-gen-003(538016690) Block PRkey=538016690 UpCnt= 3 duid=5002538B:0843FD1, Attachment: Local
0a.02.23 ch-strt-gen-001(538016980) Pool0 08GTMDWA ch-strt-gen-001(538016980) Block PRkey= 0 UpCnt= 1 duid=5000CCA0:2C2CC728, Attachment: Local
0a.02.23P1 Not Owned NONE 08GTMDWANP001 Block PRkey= 0 UpCnt= 0 duid=6000CCA0:2C2CC728:500A0981:00000001, Attachment: Local
0a.02.23P2 Not Owned NONE 08GTMDWANP002 Block PRkey= 0 UpCnt= 0 duid=6000CCA0:2C2CC728:500A0981:00000002, Attachment: Local
0b.00.5 ch-strt-gen-001(538016980) Pool0 08G6H96Z ch-strt-gen-001(538016980) Block PRkey= 0 UpCnt= 1 duid=5000CCA0:2C0BCE98, Attachment: Local
0b.00.5P1 Not Owned NONE 08G6H96ZNP001 Block PRkey= 0 UpCnt= 0 duid=6000CCA0:2C0BCE98:500A0981:00000001, Attachment: Local
0b.00.5P2 Not Owned NONE 08G6H96ZNP002 Block PRkey= 0 UpCnt= 0 duid=6000CCA0:2C0BCE98:500A0981:00000002, Attachment: Local0b.00.0 ch-strt-gen-003(538016690) Pool0 S2JVNCAH301219 ch-strt-gen-003(538016690) Block PRkey= 0 UpCnt= 3 duid=5002538A:7630AAD, Attachment: Local
0b.00.0P1 ch-strt-gen-001(538016980) Pool0 S2JVNCAH301219NP001 ch-strt-gen-001(538016980) Block PRkey= 0 UpCnt= 22 duid=6002538A:7630AAD0:500A0981:00000001, Attachment: Local
5 REPLIES 5
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Try to manually fail the disk first, to put it in the failed disk registry, then try to unfail it. I note you don't have a support contract on this system - so I assume these drives have come from an unknown source. It is likely they have been sanitized before sale, which leaves them in a "broken" state. Also ensure the DQP lists the new type of disks.
Hope this helps!
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Alex, thank you for your help.
I tried what you did, but this didn't solve my problem.
Maurice
Maurice-FreeOnes has accepted the solution
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
You have to assign the disk (or partitions in this case) for it to work. Right now, only the disk itself is assigned, not the partitions (same for 02.23):
ISK OWNER POOL SERIAL NUMBER HOME DR HOME CHKSUM
--------- ------------- ----- ------------- ------------- ------------- --------
0b.00.1 ch-strt-gen-001(538016980) Pool0 S3SGNY0M700121 ch-strt-gen-001(538016980) Block PRkey=538016980 UpCnt= 3 duid=5002538B:0970A62, Attachment: Local
0b.05.0 ch-strt-gen-003(538016690) Pool0 S40TNY0K400661 ch-strt-gen-003(538016690) Block PRkey=538016690 UpCnt= 3 duid=5002538B:0843C51, Attachment: Local
0b.05.8 ch-strt-gen-003(538016690) Pool0 S40TNY0K400680 ch-strt-gen-003(538016690) Block PRkey=538016690 UpCnt= 3 duid=5002538B:0843C64, Attachment: Local
0b.05.1 ch-strt-gen-003(538016690) Pool0 S40TNY0K400668 ch-strt-gen-003(538016690) Block PRkey=538016690 UpCnt= 3 duid=5002538B:0843C58, Attachment: Local
0b.05.5 ch-strt-gen-003(538016690) Pool0 S40TNY0K400672 ch-strt-gen-003(538016690) Block PRkey=538016690 UpCnt= 3 duid=5002538B:0843C5C, Attachment: Local
0b.05.6 ch-strt-gen-003(538016690) Pool0 S40TNY0K400653 ch-strt-gen-003(538016690) Block PRkey=538016690 UpCnt= 3 duid=5002538B:0843C49, Attachment: Local
0b.05.10 ch-strt-gen-003(538016690) Pool0 S40TNY0K400654 ch-strt-gen-003(538016690) Block PRkey=538016690 UpCnt= 3 duid=5002538B:0843C4A, Attachment: Local
0b.05.2 ch-strt-gen-003(538016690) Pool0 S40TNY0K400864 ch-strt-gen-003(538016690) Block PRkey=538016690 UpCnt= 3 duid=5002538B:0843FEA, Attachment: Local
0b.05.9 ch-strt-gen-003(538016690) Pool0 S40TNY0K400685 ch-strt-gen-003(538016690) Block PRkey=538016690 UpCnt= 3 duid=5002538B:0843C69, Attachment: Local
0b.05.4 ch-strt-gen-003(538016690) Pool0 S40TNY0K400626 ch-strt-gen-003(538016690) Block PRkey=538016690 UpCnt= 3 duid=5002538B:0843C2E, Attachment: Local
0b.05.11 ch-strt-gen-003(538016690) Pool0 S40TNY0K500202 ch-strt-gen-003(538016690) Block PRkey=538016690 UpCnt= 1 duid=5002538B:08508D1, Attachment: Local
0b.05.3 ch-strt-gen-003(538016690) Pool0 S40TNY0K400636 ch-strt-gen-003(538016690) Block PRkey=538016690 UpCnt= 3 duid=5002538B:0843C38, Attachment: Local
0b.05.7 ch-strt-gen-003(538016690) Pool0 S40TNY0K400839 ch-strt-gen-003(538016690) Block PRkey=538016690 UpCnt= 3 duid=5002538B:0843FD1, Attachment: Local
0a.02.23 ch-strt-gen-001(538016980) Pool0 08GTMDWA ch-strt-gen-001(538016980) Block PRkey= 0 UpCnt= 1 duid=5000CCA0:2C2CC728, Attachment: Local
0a.02.23P1 Not Owned NONE 08GTMDWANP001 Block PRkey= 0 UpCnt= 0 duid=6000CCA0:2C2CC728:500A0981:00000001, Attachment: Local
0a.02.23P2 Not Owned NONE 08GTMDWANP002 Block PRkey= 0 UpCnt= 0 duid=6000CCA0:2C2CC728:500A0981:00000002, Attachment: Local
0b.00.5 ch-strt-gen-001(538016980) Pool0 08G6H96Z ch-strt-gen-001(538016980) Block PRkey= 0 UpCnt= 1 duid=5000CCA0:2C0BCE98, Attachment: Local
0b.00.5P1 Not Owned NONE 08G6H96ZNP001 Block PRkey= 0 UpCnt= 0 duid=6000CCA0:2C0BCE98:500A0981:00000001, Attachment: Local
0b.00.5P2 Not Owned NONE 08G6H96ZNP002 Block PRkey= 0 UpCnt= 0 duid=6000CCA0:2C0BCE98:500A0981:00000002, Attachment: Local0b.00.0 ch-strt-gen-003(538016690) Pool0 S2JVNCAH301219 ch-strt-gen-003(538016690) Block PRkey= 0 UpCnt= 3 duid=5002538A:7630AAD, Attachment: Local
0b.00.0P1 ch-strt-gen-001(538016980) Pool0 S2JVNCAH301219NP001 ch-strt-gen-001(538016980) Block PRkey= 0 UpCnt= 22 duid=6002538A:7630AAD0:500A0981:00000001, Attachment: Local
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Jonathan, this looks promising. thank you for looking into it. I am going to try this soon and will report back to you hear.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Wow I feel stupid for not seeing this before 😞
Thanks a lot for your help.
For everybody who is reading this, this is the solution:
storage disk assign -disk 1.0.5 -owner ch-strt-gen-001 -root true -force true
storage disk assign -disk 1.0.5 -owner ch-strt-gen-001 -data true -force true
RESULT:
shared 1.0.5 0 SAS 10000 1.61TB 1.64TB (reconstruction 0% completed)