ONTAP Hardware

Create Aggregate with 23 disks and one hot spare?

NEWNETAPP987
3,519 Views

Hi,

I added two new, 24 disk shelves, to my 6220.

 

I plan to add 1 shelf to each controller.

 

I think I will create a 23 disk aggregate -- (21+2) and one hot spare.  I will have one raid group size 11 and one size 10.

 

Does this seem like a reasonable implementation or is there a better one?

 

Thanks,

4 REPLIES 4

rwelshman
3,508 Views

What type of disks will they be? SAS / SATA, etc.

 

If you have two raid gropus, there will be four parity disks. If you want a true 21 + 2, then you should set the raid group size to be 23 disks total, and have one raid group. But that would be a large raid group for large sized disks - since the rebuild time will be so long.

aborzenkov
3,489 Views

Max SATA raid group size is 20 disks, so 23 may not be possible.

georgevj
3,480 Views

True.

Just FYI;

max_disks.JPG

If this post resolved your issue, help others by selecting ACCEPT AS SOLUTION or adding a KUDO.
Cannot find the answer you need? No need to open a support case - just CHAT and we’ll handle it for you.

JGPSHNTAP
3,468 Views

I assume he said SAS, b/c he was saying 23.. 

 

If we are talking SAS, I would do RG 22  WHy would you do rg11 and 10. that makes no sense.. 

Public