ONTAP Hardware

FAS-2240 Mix disks FW

SSH
1,302 Views

Hi,

We have an SAN FAS-2240 currently working with disks X422 FW NA01. We would add a disk but the FW is NA03. The disk is recognized when you add it but we didn't affect it yet.

 

Is there any potentiel problem?

1 ACCEPTED SOLUTION

andris
1,256 Views

There isn't any specific restriction for uniform firmware on a specific drive model.

Be aware that you need to compare the entire drive model string when checking firmware.

For example, X422_HCBFE600A10 latest firmware is NA05.

See: https://mysupport.netapp.com/site/downloads/firmware/disk-drive-firmware

It is highly recommended to update all of the disk firmware to the latest version.

View solution in original post

1 REPLY 1

andris
1,257 Views

There isn't any specific restriction for uniform firmware on a specific drive model.

Be aware that you need to compare the entire drive model string when checking firmware.

For example, X422_HCBFE600A10 latest firmware is NA05.

See: https://mysupport.netapp.com/site/downloads/firmware/disk-drive-firmware

It is highly recommended to update all of the disk firmware to the latest version.

Public