Can we add a new DS14Mk2 AT (SATA) disk shelf to a NetApp controller non-disruptively on a new loop ?
I referred the below document and in page-161, the table says, 'You can only hot-add a DS14mk2 AT disk shelf to an existing DS14mk2 AT disk shelf.'
Does it mean, it doesn't support Hot adding SATA shelf to NetApp controller non-disruptively on a new loop ? If it is supported, can you point me to the right document where it says so ?
No, it means you cannot hot-add the shelf to a loop containing FC shelves. You can, of course, hot-add a new DS14 shelf to a completely new FC port on your filer, as long as tthis port is configured as INITIATOR (not TARGET).
See, for example, the DS14mk2 AT Hardware Service Guide (https://now.netapp.com/NOW/knowledge/docs/hardware/filer/210-02360_F0.pdf) on page 48, chapter "Hot-adding a disk shelf to an existing adapter in your system"
hope that helps
Thanks for the information Michael. Cheers
NetApp Wins One Silver and One Bronze Stevie® Award in 2022 Stevie Awards for Sales and Customer Service
Live Chat, Watch Parties, and More!
Engage digitally throughout the sales process, from product discovery to conﬁguration, and handle all your post-purchase needs.