NetApp Community Update
This site will enter Read Only mode on July 23 as we prepare to move to a new platform. You will still be able to view content, but posting and replying will be temporarily disabled. We're excited to launch our new Community experience on July 30 and more information will follow soon. Stay connected during the transition - Join our Discord community today.
I have just inherited a couple of FAS3020 arrays. I powered them on and there are no status alerts. The problem is that there is no output from the console port on either array. I have tried using both PuTTY and Tera Term at 9600 8-n-1. The terminal window stays blank for both arrays. Am I missing something?
Hope the serial cable is in good condition. Is there a chance that you can get the credentials and IP address of the RLM?
If this post resolved your issue, help others by selecting ACCEPT AS SOLUTION or adding a KUDO. Cannot find the answer you need? No need to open a support case - just CHAT and we’ll handle it for you.
Thank you for the responses. Instead of using the USB to DB9 cable, I found a computer that still had a DB9 port. I was able to console successfully from that PC. Strange thing is that I have been able to use the USB to DB9 converter without any problems on our Cisco gear.
