Simulator Discussions

9.2 sim > 9.3

bazmercer
7,747 Views

edit: Looks like the 9.3 simulator is out now, I've deployed that OVA but it still panics....

 

 

 

Hi!

I'm having trouble upgrading the simulator to 9.3. I first tried it from 9.1 to 9.2 and to 9.3. I managed to get to 9.2 fine but 9.3 paniced. I then obtained the 9.2 sim and repeated the upgrade but I still receive a panic on first boot

 

PANIC: privileged instruction fault: num 1 code 0 cs:rip0x20 (see attached)

 

I've tried it with 9.3rc1 and 9.3GA but they all panic. This is on esxi 5.5.0, 6480324

 

Any ideas?

 

Thanks

 

 

5 REPLIES 5

bazmercer
7,545 Views

Talking to myself, but for anyone else that has the panic issue moving it from our AMD cluster to our Intel one seems to have solved the problem

 

edit: incidentally I *think* this is because of our EVC settings but I'm not in a position to test it right now. We have our AMD cluster EVC set to "AMD Opteron™ Generation 3 (no 3DNow!™)" for whatever reason. It looks like one of the first things that 9.3 does is check for hardware AES support, which isn't enabled until "AMD Opteron™ Generation 4". Just a theory, but something to try.

SeanHatfield
7,519 Views

Thanks for sharing that update.  

If this post resolved your issue, help others by selecting ACCEPT AS SOLUTION or adding a KUDO.

NeilMurphy
6,889 Views

I'm getting the same error with the 9.4 simulator. I'm running ESXi 6.5 on an AMD Turion(tm) II Neo N54L Dual-Core Processor. It looks like the newer versions of the sim don't like certain AMD procs. Time to upgrade the lab to Intel so!

bazmercer
6,886 Views

I've had a quick search and it looks like that cpu doens't support hardware AES, which is probably what the issue is

NeilMurphy
6,882 Views

Cheers Baz. BTW, do you know if there's a list of supported procs or required features?

Public