System ID Mismatch and reboot

[Atish1]

Hi Team,

After clean configuration of Cluster 1 Node 2, I am getting below mentioned Warning. It will get reboot and reboot in simulator.

Ending netapp_loadnvram - 04:13:41 Boot Menu will be available. WARNING: System ID Mismatch. This usually occurs when replacing a boot device or NVRAM cards! Override system ID? {y/n}

Please assist.

[andymirf · Accepted solution]

Hi.

Did you boot the node BEFORE you changed the sysid for the second node? This usually occurs when the second node has been booted to a login prompt, rebooted and then the boot parameters changed.

If this is the case, just accept )or rebuild the simulator second node and chnage the boot parameters BEFORE a boot).

[Atish1]

Hi andymirf,

Thanks for the reply!

I'll rebuild the simulator second node and change the boot parameters BEFORE a boot. Once done I'll update here in reply.

[GINO_ISRAEL]

Did you get it running good ? What was the solution ? Thanks !

[Atish1]

Hi Andymirf and GINO_ISRAEL,

I have rebuilt everything from scratch. Now everything is running fine.

Thanks for the reply!