VMware Solutions Discussions
After searching in IMT Tools for HBA QLA2432 and DOT 8.1.2, I didn't find any trace for this HBA
Does it mean it is not supported configuration?
As we have a lot of ESX Hosts (Dell server) with this HBA and we would like to upgrade our NetApp SAN from DOT7 to 8
See The Solution
Are you sure about QLA2432?
Please post the output from "cat /proc/scsi/qlxxxx/y"
Any chances this explains the confusion?
If your HBA is in fact QLE2460 or QLE2462, they are both supported with DOT 8.1.2
I'm waiting for root password regarding our request
Radek, it's not the display issue
as we did a reboot of the PowerEdge
It shows HBA during boot process = ISP2432
It's a sample dump courtesy of Google search from another machine (of course 😞
QLogic Fibre Channel HBA Driver: 8.02.00.06.05.03-k
QLogic QLE2462 - PCI-Express to 4Gb FC, Dual Channel
ISP2432: PCIe (2.5Gb/s x4) @ 0000:0c:00.0 hdma+, host#=1, fw=4.04.05
So... is your HBA in fact QLE2462?
And just another proof found:
ISP2432 is the ASIC used on QLE246x
View solution in original post
This is a new managed infrastructure for us (but with old equipment)
I'm more used with Emulex
Thanks to you and Thomas