We're looking at buying a couple of FAS2040s to replace some aging FAS250s we have. At the same time we're going to move start virtualising our environment.
Currently we're planning on connecting two vSphere 5 hosts to the primary FAS2040 directly via fibre channel so as to provide a HA environment for the guests. If I want to add a third host to the cluster, am I able to do so via iSCSI (rather than installing a fibre channel fabric) so that all three hosts can share the same datastore? I've read through the various vmware/netapp documentation, but the answer isn't clear.
This is definitely a bit odd. From a NetApp standpoint we can share the LUN out both over FC and ISCSI with no problems however I don't believe VMware supports this. In fact I don't think VMware is a fan of FC direct connect either. If you don't have a FC Fabric I would strongly suggest you leverage a pure IP solution and use NFS or ISCSI, The performance at scale of all 3 protocols is nearly the same and certainly on a deployment with a 2040 the protocol is not going to be a limiting factor in performance. You simply would not have enough spindles or VMs to saturate the links. I think you would be better off with a more common and easily supportable configuration of NFS or ISCSI.