Active IQ Unified Manager Discussions
we are rolling out ne storage systems quite often. There we have a lot of similar things to configure. We had in mind to use powershell for the setup, but maybe WFA is a smarter way.
We want to start running a workflow as the cluster is created and reachable with an cluster-management LIF. Hardware setup is finished.
There are some task to do:
- create IFgrps for data PORTs
- add VLANs
-Change MTU and FLow controll of network Ports
- create failover groups prior 8.3
- setup ASUP
- assign disks to special pattern shelfs by half of the disks to one node and other to second (so no disk autoassign)
- create aggregate
- setuo a test SVM
- setup Remote support agent ( https://library.netapp.com/ecmdocs/ECMP1368469/html/GUID-9040D561-CA44-4849-8A45-9C2D1BB0D38F.html)
- add DNS server
- add time server
- and more thing.
So my question, has somebody already done this, jsut to have some inspirations. It qould be great to share a workflow.
Many thanks best wishes,
This workflow was posted sometime ago.
You can check this one.