Hi,
Your netapp-harvest.conf file has a few inconsistencies, and if Harvest doesn't collect then nothing will show in Graphite/Grafana.
First, start with this as your netapp-harvest.conf file:
##
## Configuration file for NetApp Harvest
##
## Create a section header and then populate with key/value parameters
## for each system to monitor. Lines can be commented out by preceding them
## with a hash symbol ('#'). Values in all capitals should be replaced with
## your values, all other values can be left as-is to use defaults
##
## There are two reserved section names:
## [global] - Global key/value pairs for installation
## [default] - Any key/value pairs specified here will be the default
## value for a poller should it not be listed in a poller section.
##
##
## Global reserved section
##
[global]
grafana_api_key = eyJrIjoiNURNMGVOdU1Iem00dXlZSDRjd2dOQXVQVlVuZXRWUFQiLCJuIjoiR3JhcGhpdGUiLCJpZCI6MX0=
grafana_url = https://172.29.40.246
grafana_dl_tag =
##
## Default reserved section
##
[default]
#====== Graphite server setup defaults ========================================
graphite_enabled = 1
graphite_server = 172.29.40.246
graphite_port = 2003
graphite_proto = tcp
normalized_xfer = mb_per_sec
normalized_time = millisec
graphite_root = default
graphite_meta_metrics_root = default
#====== Polled host setup defaults ============================================
host_type = FILER
host_port = 443
host_enabled = 1
template = default
data_update_freq = 60
ntap_autosupport = 0
latency_io_reqd = 10
auth_type = password
username = opmadmin
password = INSERT_PASSWORD_HERE
ssl_cert = INSERT_PEM_FILE_NAME_HERE
ssl_key = INSERT_KEY_FILE_NAME_HERE
##
## Monitored host examples - Use one section like the below for each monitored host
##
#====== 7DOT (node) or cDOT (cluster LIF) for performance info ================
#
[INSERT_CLUSTER_OR_CONTROLLER_NAME_HERE]
hostname = 192.168.110.50
site = OR
#====== OnCommand Unified Manager (OCUM) for cDOT capacity info ===============
#
[scornopm1]
hostname = 172.29.40.60
site = OR
host_type = OCUM
data_update_freq = 900
normalized_xfer = gb_per_sec
Next:
1) Replace INSERT_PASSWORD_HERE with your password
2) Replace INSERT_CLUSTER_OR_CONTROLLER_NAME_HERE with the name of your cluster (not the cluster lif, but the cluster name shown from 'cluster identity show')
Then, on both your cDOT cluster and your OCUM server (Unified Manager server, not Performance Manager server) you must have the opmadmin account created and password set. These accounts must have minimim privileges as defined in the Harvest user guide. Because your OCUM servername has opm in it I am wondering if you also need to update the details to be for your OCUM server (and not OPM server). If this is a misunderstanding, update the hostname and IP address to be your OCUM server.
Lastly start the pollers with
/opt/netapp-harvest/netapp-manager -start
Hope this helps.
Cheers,
Chris Madden
Storage Architect, NetApp EMEA (and author of Harvest)
Blog: It all begins with data
If this post resolved your issue, please help others by selecting ACCEPT AS SOLUTION or adding a KUDO or both!
