Active IQ and AutoSupport Discussions

Highlighted

Active IQ -Incorrectly showing the hostname as an IP and a blank model number

I have a customer with a 2 node FAS2650 running OnTAP 9.1.

In Active-IQ it shows one node perfectly, the other node it shows the hostname as it's IP address, the system type as 'OTHERS' and the model is empty.

I looked in the NetApp Support, Inventory details and it is configured / identified there correctly.

 

 

ActiveIQ error.PNG

 

 

Any ideas how i can get this resolved as when i try to use the Upgrade Advisor from within Active-IQ it fails and i suspect this is due to the above

 

 

2 REPLIES 2
Highlighted

Re: Active IQ -Incorrectly showing the hostname as an IP and a blank model number

I would open a case with NetApp support.

 

by any chance did you vistied legagcy autosupport link ..? there you can enter hostname & run the upgrade advisor.

Highlighted

Re: Active IQ -Incorrectly showing the hostname as an IP and a blank model number

To be clear, Select the support link on the web page and open a Support Site ticket for any Active IQ issues.

It would be good to verify that the node is successfully sending AutoSupports to NetApp from the node’s perspective.
Try the NEW Knowledgebase!
NetApp KB Site
Forums