I have an E2712 array with 2 controllers and I want to add a DE212C drive tray. I have reviewed the manuals and I cannot find an example of how to make the connection. Appears as connecting DD1600 (SAS-2) trays but not DE212C (SAS-3) Can someone help me how should I connect?
I attach the example that comes in the manual. Should I make the same connection despite being a DE212C tray?
Controller A (port 1 exp) cabling to Tray A IOM port 1
Controller A (port 2 exp) cabling to Tray A IOM port 2
Controller B (port 1 exp) cabling to Tray B IOM port 1
Controller B (port 2 exp) cabling to Tray B IOM port 2
Thank you very much ahmadm for the answer, in the link you sent me there are several examples of how everything should be connected. It is true that the example that I propose does not appear, but it seems that the form that you indicate is the correct one, controller A to IOM A, and controller B to IOM B.
Since the IOM ports can handle both input and output, what you describe would be fine. Here's the graphic of how we would have someone do it. Note the changes on what ports are used. The ports being used are for consistency when describing how to cable. [cid:image001.png@01D77C76.8B0BF200]
Thank you very much MitchBlackburn for the reply. I understand as you are indicating that the connectivity is correct. You have attached a .png image to me but I can't see it, is it an architecture of how it should be connected?