Re: Set-NaNetInterface -NoDdns not working

francoisbnc · ‎2012-12-19

set-NaNetInterface don't set parameter noddns on interface with PS v2.2 , just ignored.

Is someone experience the same?

vinith · ‎2012-12-19

Hi Francois, could you please elaborate more on your issue.

francoisbnc · ‎2013-01-06

options dns.update.enable set to secure and the content of

/etc/rc,

ifconfig vif1-281 `hostname`-vif1-281 netmask 255.255.255.0 broadcast 10.139.81.255 partner vif1-281 up

I would like add an alias on this interface by PS without this ip will register in dns.

PS>Set-NaNetInterface -InterfaceName vif1-281 -Alias 10.11.11.11 -NoDdns

Active configuration works fine

ifconfig vif1-281

vif1-281: flags=0xa4c863<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500

inet 10.139.81.13 netmask 0xffffff00 broadcast 10.139.81.255

inet 10.11.11.11 netmask 0xff000000 broadcast 10.255.255.255 noddns

partner vif1-281 (not in use)

But RC configuration is not created with no_ddns flag

/etc/rc

ifconfig vif1-281 alias 10.11.11.11 netmask 255.0.0.0 broadcast 10.255.255.255 up

francoisbnc · ‎2013-01-13

Hi Vinith,

Do you know how this oversight can be fixed. NGS support case? probably not

francois

vinith · ‎2013-01-14

Hi Francois, I would check it up and get back soon.

vinith · ‎2013-01-14

Could you please let us know what version of the toolkit you are using and what version of Data ONTAP you are running it against ?

francoisbnc · ‎2013-01-14

The version is that embeded in WFA 2.0 so toolkit version 2.2 and I tested on 7.3.7, 8.1.1, 8.1.2 with the same issue.

vinith · ‎2013-01-15

Hi Francois thanks for bringing this to our attention, we’ll work on it to get it fixed in the next release of the toolkit.

francoisbnc · ‎2013-01-15

Great, thank you.

Do you know when this new release supposed to be out and if it's a long way, if it's possible to have a fix for that.

vinith · ‎2013-01-16

we're targeting a release in 3 months.

francoisbnc · ‎2013-01-13

Seems I'm litle bit alone on this thread, anyway I would be very happy if somebody can make a test with Set-NaNetInterface powershell command and confirm that /etc/rc ifconfig line is successfully modified?

I tested on 7.3.7, 8.1.1, 8.1.2 with same problem

francois

bsti · ‎2013-01-13

Hi Francios,

I tried this with toolkit version 2.2 and can verify the /etc/rc does NOT get the no_ddns switch added.

This may be an oversight in the Set-NaInterface cmdlet design.