Microsoft Virtualization Discussions
set-NaNetInterface don't set parameter noddns on interface with PS v2.2 , just ignored.
Is someone experience the same?
Hi Francois, could you please elaborate more on your issue.
options dns.update.enable set to secure and the content of
ifconfig vif1-281 `hostname`-vif1-281 netmask 255.255.255.0 broadcast 10.139.81.255 partner vif1-281 up
I would like add an alias on this interface by PS without this ip will register in dns.
PS>Set-NaNetInterface -InterfaceName vif1-281 -Alias 10.11.11.11 -NoDdns
Active configuration works fine
vif1-281: flags=0xa4c863<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 10.139.81.13 netmask 0xffffff00 broadcast 10.139.81.255
inet 10.11.11.11 netmask 0xff000000 broadcast 10.255.255.255 noddns
partner vif1-281 (not in use)
But RC configuration is not created with no_ddns flag
ifconfig vif1-281 alias 10.11.11.11 netmask 255.0.0.0 broadcast 10.255.255.255 up
Seems I'm litle bit alone on this thread, anyway I would be very happy if somebody can make a test with Set-NaNetInterface powershell command and confirm that /etc/rc ifconfig line is successfully modified?
I tested on 7.3.7, 8.1.1, 8.1.2 with same problem
I tried this with toolkit version 2.2 and can verify the /etc/rc does NOT get the no_ddns switch added.
This may be an oversight in the Set-NaInterface cmdlet design.
Do you know how this oversight can be fixed. NGS support case? probably not
Hi Francois, I would check it up and get back soon.
Could you please let us know what version of the toolkit you are using and what version of Data ONTAP you are running it against ?
The version is that embeded in WFA 2.0 so toolkit version 2.2 and I tested on 7.3.7, 8.1.1, 8.1.2 with the same issue.
Hi Francois thanks for bringing this to our attention, we’ll work on it to get it fixed in the next release of the toolkit.
Great, thank you.
Do you know when this new release supposed to be out and if it's a long way, if it's possible to have a fix for that.
we're targeting a release in 3 months.