Microsoft Virtualization Discussions

Set-NaNetInterface -NoDdns not working

francoisbnc
6,884 Views

set-NaNetInterface don't set  parameter noddns on interface with PS v2.2 , just ignored.

Is someone experience the same?

11 REPLIES 11

vinith
6,857 Views

Hi Francois, could you please elaborate more on your issue.

francoisbnc
6,857 Views

options dns.update.enable set to secure and the content of

/etc/rc, 

ifconfig vif1-281 `hostname`-vif1-281 netmask 255.255.255.0 broadcast 10.139.81.255 partner vif1-281 up

I would like add an alias on this interface by PS without this ip will register in dns.

PS>Set-NaNetInterface -InterfaceName vif1-281 -Alias 10.11.11.11 -NoDdns

Active configuration works fine

ifconfig vif1-281

vif1-281: flags=0xa4c863<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500

        inet 10.139.81.13 netmask 0xffffff00 broadcast 10.139.81.255

        inet 10.11.11.11 netmask 0xff000000 broadcast 10.255.255.255 noddns

        partner vif1-281 (not in use)

But RC configuration is not created with no_ddns flag

/etc/rc

ifconfig vif1-281 alias 10.11.11.11 netmask 255.0.0.0 broadcast 10.255.255.255 up 

francoisbnc
6,857 Views

Hi Vinith,

Do you know how this oversight can be fixed. NGS support case? probably not

francois

vinith
6,857 Views

Hi Francois, I would check it up and get back soon.

vinith
6,857 Views

Could you please let us know what version of the toolkit you are using and what version of Data ONTAP you are running it against ?

francoisbnc
6,857 Views

The version is that embeded in WFA 2.0 so toolkit version 2.2 and I tested on 7.3.7, 8.1.1, 8.1.2 with the same issue.

vinith
6,857 Views

Hi Francois thanks for bringing this to our attention, we’ll work on it to get it fixed in the next release of the toolkit.

francoisbnc
6,366 Views

Great, thank you.

Do you know when this new release supposed to be out and if it's a long way, if it's possible to have a fix for that.

vinith
6,366 Views

we're targeting a release in 3 months.

francoisbnc
6,857 Views

Seems I'm litle bit alone on this thread, anyway I would be very happy if somebody can make a test with Set-NaNetInterface powershell command and confirm that /etc/rc ifconfig line is successfully modified?

I tested on  7.3.7, 8.1.1, 8.1.2 with same problem

francois

bsti
6,857 Views

Hi Francios, 

  I tried this with toolkit version 2.2 and can verify the /etc/rc does NOT get the no_ddns switch added.

This may be an oversight in the Set-NaInterface cmdlet design.

Public