ONTAP Discussions

Cluster Mode SNMP Monitoring SnapMirror Lag

Karl_Haudeck

Hello,

i'm trying to monitor the snapmirror relationship lagtime with a snmp monitoring-tool. While setting up the configuration, i discovered to use following OID:

snapmirror rel lag
1.3.6.1.4.1.789.1.29.1.1.7

When i'm executing a snmpwalk against this OID, i'm getting back every single snapmirror relationship with the actuall lagtime:

----------------------- New Test -----------------------
Paessler SNMP Tester 5.1.3
07.01.2015 16:14:02 (1 ms) : Device: xx.xx.xx.xx
07.01.2015 16:14:02 (1 ms) : SNMP V2c
07.01.2015 16:14:02 (1 ms) : Walk 1.3.6.1.4.1.789.1.29.1.1.7
07.01.2015 16:14:02 (274 ms) : 1.3.6.1.4.1.789.1.29.1.1.7.4 = "7913500"
07.01.2015 16:14:03 (555 ms) : 1.3.6.1.4.1.789.1.29.1.1.7.5 = "7913500"
07.01.2015 16:14:03 (839 ms) : 1.3.6.1.4.1.789.1.29.1.1.7.6 = "7913600"
...

 

But when i try to get the lagtime for only one snapmirror relationship and use the unique OID "1.3.6.1.4.1.789.1.29.1.1.7.4 ", i'm receiving follwoing error:

----------------------- New Test -----------------------
Paessler SNMP Tester 5.1.3
07.01.2015 16:56:33 (7 ms) : Device: xx.xx.xx.xx
07.01.2015 16:56:33 (10 ms) : SNMP V2c
07.01.2015 16:56:33 (13 ms) : Custom OID 1.3.6.1.4.1.789.1.29.1.1.7.4
07.01.2015 16:56:33 (28 ms) : -------
07.01.2015 16:56:33 (32 ms) : Value: No such instance (SNMP error # 223)
07.01.2015 16:56:33 (35 ms) : Done

Is this a known issue or normal?

Thank you!

2 REPLIES 2

Re: Cluster Mode SNMP Monitoring SnapMirror Lag

Jonathan

Same thing here running 8.2.1P2

 

Walk gives

 

NETAPP-MIB::snapmirrorRelLag.3 = Timeticks: (22200) 0:03:42.00
NETAPP-MIB::snapmirrorRelLag.5 = Timeticks: (22300) 0:03:43.00
NETAPP-MIB::snapmirrorRelLag.6 = Timeticks: (3592000) 9:58:40.00
NETAPP-MIB::snapmirrorRelLag.7 = Timeticks: (3592200) 9:58:42.00
NETAPP-MIB::snapmirrorRelLag.8 = Timeticks: (1697300) 4:42:53.00
NETAPP-MIB::snapmirrorRelLag.12 = Timeticks: (276500) 0:46:05.00
NETAPP-MIB::snapmirrorRelLag.13 = Timeticks: (2975700) 8:15:57.00
NETAPP-MIB::snapmirrorRelLag.14 = Timeticks: (1697400) 4:42:54.00
NETAPP-MIB::snapmirrorRelLag.15 = Timeticks: (276500) 0:46:05.00
NETAPP-MIB::snapmirrorRelLag.16 = Timeticks: (2975700) 8:15:57.00
NETAPP-MIB::snapmirrorRelLag.17 = Timeticks: (2982900) 8:17:09.00
NETAPP-MIB::snapmirrorRelLag.18 = Timeticks: (11768400) 1 day, 8:41:24.00
NETAPP-MIB::snapmirrorRelLag.19 = Timeticks: (1698300) 4:43:03.00

 

 

try to query first instance

 

NETAPP-MIB::snapmirrorRelLag.3 = No Such Instance currently exists at this OID

 

Re: Cluster Mode SNMP Monitoring SnapMirror Lag

MBB

Hey Karl,

 

We have been using a cheap application that collects tons of perfomance data. There are 100's of metrics and this tool grabs most of them. Check out Arxscan.com

2021 NetApp Partner Experience Survey
PES Banner
All Community Forums
Public