ONTAP Discussions
ONTAP Discussions
Hi All,
I have fas2040 filer in 7-mode but need to test some API calls for cluster-mode filers and I am looking for ways to do that.
I have found out that it is possible to convert filer from 7-mode to cluster-mode but it seems that with my credentials I don't have authorization to access KB, where the flow is described.
If anyone could advice where to look for it or provide any documentation I would be very grateful.
But I have a few concerns here - is backward conversion (from cluster to 7-mode) possible or I will loose 7-mode forever?
Is there any other way to make some API calls to cluster-mode filer?
Thank you very much anyone for help.
Regards,
Hasmik
Solved! See The Solution
If you are looking for how to convert a 7-mode filer to Clustered ONTAP (cDOT) checkout the following KB article:
https://kb.netapp.com/support/index?page=content&id=1013517&cat=DATA_ONTAP_8_CLUSTER_MODE&actp=LIST
If you cannot access the KB article shoot me a PM.
Dan
If you just need to do some testing, perhaps it would be easier to use a simulator instead of going through the process of switching the filer to cluster-mode. Is the 2040 filer a test system?
Hi Riley,
Thank you very much for the response. What you mean by saying test system? We use that filer for testing needs.
I would be very grateful if you could give me a hint how to use simulator.
Regards,
Hasmik
If you are looking for how to convert a 7-mode filer to Clustered ONTAP (cDOT) checkout the following KB article:
https://kb.netapp.com/support/index?page=content&id=1013517&cat=DATA_ONTAP_8_CLUSTER_MODE&actp=LIST
If you cannot access the KB article shoot me a PM.
Dan
Hi Dan,
Thanks a lot for the reply, but I don't have access to that KB
Regards,
Hasmik
Hello Dan
I need this article but I do not have the necessary access...
Is there a way through which I can acquire it..
Thanks for help
Shubham
Hi Dan,
could you possibly send me this KB as well?
-Alen
Hello
Can you please share the Kb article, i cant find it online on Netapp Site, TIA.
If you go to your "My AutoSupport" portal you should see a "Transition Adviser" option to help you understand the implications and possibility of migrating to C-Mode.
You can pretty easily migrate volumes from 7-mode to C-Mode, but it would take some serious leg work to go back.
I hope this helps.
Thanks for the help, I'll try to get that information.
You will need to completely reinstall filer losing all existing data; and the first thing you will need are c-mode licenses. Do you have them?
You should also be able to reinstall back in 7-mode; again losing all existing data.
Thank you for the help.
I don't worry about loosing old data, but I am not sure about c-mode license, I'll try to find out if we have that, but If it is different from 7-mode license, mu guess is that we don't have it. Could you please provide more information about c-mode license?
BTW where I can find some guide regarding backward conversion (from 7-mode to c-mode)?