Looking for documentation to configure boot from SAN from a HP-UX Itanium HP rx2800 i4 Itanium Servers. 2port 8GB AH401A Qlogic HBA HPUX 11i V3. NetApp A300
Per our Interop Matrix (IMT) at this link, the following configuration is supported:
Hope this helps!
Thanks for the help. looking for details on how to create the boot lun.
You'd be after "lun create", with a type of "hpux", and generally you would create a single initiator igroup which maps the LUN to the host as ID "0", and then use bcfg
Join our Discord Community