Hi all,
I added vlan and found network disconnection in Data Ontap 7-mode.
The messages are below.
===================================messages==============================
SGD_ST001a> vlan add vif1 2940
vlan: vif1-2940 has been created
SGD_ST001a> Thu Aug 6 14:49:08 KST [SGD_ST001a:netif.sfpNotSupported:error]: The SFP+ module (FINISAR CORP. FTLX8571D3BCL ) installed in e1a is not supported with this network interface.
Thu Aug 6 14:49:08 KST [SGD_ST001a:netif.sfpNotSupported:error]: The SFP+ module (FINISAR CORP. FTLX8571D3BCL ) installed in e2a is not supported with this network interface.
Thu Aug 6 14:49:09 KST [SGD_ST001a:snmp.link.down:info]: Interface 3 is down.
Thu Aug 6 14:49:09 KST [SGD_ST001a:netif.linkInfo:info]: Ethernet e1a: Link being reconfigured.
Thu Aug 6 14:49:09 KST [SGD_ST001a:netif.sfpNotSupported:error]: The SFP+ module (FINISAR CORP. FTLX8571D3BCL ) installed in e1a is not supported with this network interface.
Thu Aug 6 14:49:09 KST [SGD_ST001a:snmp.link.down:info]: Interface 5 is down.
Thu Aug 6 14:49:09 KST [SGD_ST001a:netif.linkInfo:info]: Ethernet e2a: Link being reconfigured.
Thu Aug 6 14:49:09 KST [SGD_ST001a:netif.sfpNotSupported:error]: The SFP+ module (FINISAR CORP. FTLX8571D3BCL ) installed in e2a is not supported with this network interface.
Thu Aug 6 14:49:09 KST [SGD_ST001a:netif.sfpNotSupported:error]: The SFP+ module (FINISAR CORP. FTLX8571D3BCL ) installed in e1a is not supported with this network interface.
Thu Aug 6 14:49:09 KST [SGD_ST001a:netif.sfpNotSupported:error]: The SFP+ module (FINISAR CORP. FTLX8571D3BCL ) installed in e2a is not supported with this network interface.
Thu Aug 6 14:49:09 KST [SGD_ST001a:pvif.allLinksDown:CRITICAL]: vif1: all links down
SGD_ST001a> Thu Aug 6 14:49:12 KST [SGD_ST001a:snmp.link.up:info]: Interface 3 is up
Thu Aug 6 14:49:12 KST [SGD_ST001a:netif.linkUp:info]: Ethernet e1a: Link up.
Thu Aug 6 14:49:12 KST [SGD_ST001a:snmp.link.up:info]: Interface 5 is up
Thu Aug 6 14:49:12 KST [SGD_ST001a:netif.linkUp:info]: Ethernet e2a: Link up.
Thu Aug 6 14:49:12 KST [SGD_ST001a:pvif.switchLink:warning]: vif1: switching to e1a
==============================================================================================
How do I add a vlan without links down?
Is there any special command?
Please let me know.
Thanks.
