ONTAP Discussions

Lun move events log filter search

LUN_Move_Events_filter
4,621 Views

hi there, I did a 'lun move' over the weekend on a FAS8080, it took many hours and now I'm trying to  find when it completed to determine how long it took.

 

Are LUN Moves reported as 'jobs' or 'events' and how would I filter all the events to find only the activities related to 'lun moves'. I've tried all the obvious things, but I get zero results.

 

Anyone have a CLI command to return all lun move activities?

10 REPLIES 10

maffo
4,591 Views

hi @LUN_Move_Events_filter 

you can use "event log show" command to filter for specific events, e.g.
::> event log show -severity * -event lun.*

There is also the command "lun move show" that would tell you how long a copy took (if you add -instance at the end), see https://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.dot-cm-cmpr-930%2Flun__move__show.html

 

paul_stejskal
4,521 Views

I think it should be filterable by "lun" or "move". You might make sure you are in diag.

LUN_Move_Events_filter
4,498 Views

Diag mode to view lun.move events? That seems extreme. It also makes no difference. I see zero entries with the following command.

 

event log show -severity * -event lun.*

LUN_Move_Events_filter
4,499 Views

Thanks for the reply. I don't see any entries when I run this command.

paul_stejskal
4,490 Views
Serial # or host name? I will see if I can find it. The other option is audit-mlog-txt.gz in AutoSupport. maybe you can see when it started at least.

LUN_Move_Events_filter
4,489 Views

we are a secure site, no S/N or Autosupport. As much as I want the answer, I'd just like to know how to find it myself.

maffo
4,470 Views

Most likely you did not find anything with my command as I didn't provide it correctly, sorry about that.

Some events are logged as lun.* while others are logged as LUN.* and LUN move uses the latter; I would then suggest to change the command to "event log show -severity -event LUN.*"

Based on the EMS event catalog (https://library.netapp.com/ecm/ecm_get_file/ECMLP2843561) you should be looking for the events "LUN.move.started" and "LUN.move.dstPresent"

LUN_Move_Events_filter
4,432 Views

Fantastic, yes, that worked, who knew, capital LUN.

 

Ok, so that shows when the move started, and when the new LUN is created in the new destination, but not when the move completes. I know it took a few hours to finish the data copy, there does not seem to be a LUN event which shows this?

 

How do I find out then the data copy completes?

maffo
4,422 Views

the total time it took for the move should be visible with with "lun move show -instance" command.

will see if I can find any other events which can be used for this purpose.

LUN_Move_Events_filter
4,418 Views

Thanks Maffo, but no, lun move command only shows results while the move is running, not after its finished.

Public