ONTAP Discussions

ONTAP 8.3 Replaced drives Firmware Update

TimMc
2,762 Views

Hello,

We have a FAS 3240. We replaced a broken drive. The new drive is not on the same firmware as the other drives. Can we simply upgrade the firmware on 1 disk? Will this impact anything on production by just updating the firmware on a single disk? 

 

This is the command I would run?

storage disk firmware udpate -disk  (name)

Any help is appreciated...

Thanks

Netapp Newbie.

1 ACCEPTED SOLUTION

SpindleNinja
2,741 Views

I would first update your DQP - https://mysupport.netapp.com/NOW/download/tools/diskqual/    see if that helps.   

 

I would also think about updating to the latest firmware - https://mysupport.netapp.com/NOW/cgi-bin/diskfwmustread.cgi/download/tools/diskfw/bin/all  

 

There's no downtime,  it will pull disks out one at a time from the raidgroups and update the firmware.    

 

You can also do the shelf firmware too at this time.   

View solution in original post

3 REPLIES 3

SpindleNinja
2,751 Views

I'm assuming that the new drive has a newer firmware than the rest of them? 

 

TimMc
2,745 Views

My apologies. The new drives firmware is actually older. 

SpindleNinja
2,742 Views

I would first update your DQP - https://mysupport.netapp.com/NOW/download/tools/diskqual/    see if that helps.   

 

I would also think about updating to the latest firmware - https://mysupport.netapp.com/NOW/cgi-bin/diskfwmustread.cgi/download/tools/diskfw/bin/all  

 

There's no downtime,  it will pull disks out one at a time from the raidgroups and update the firmware.    

 

You can also do the shelf firmware too at this time.   

Public