ONTAP Discussions

Highlighted

ONTAP 8.3 Replaced drives Firmware Update

Hello,

We have a FAS 3240. We replaced a broken drive. The new drive is not on the same firmware as the other drives. Can we simply upgrade the firmware on 1 disk? Will this impact anything on production by just updating the firmware on a single disk? 

 

This is the command I would run?

storage disk firmware udpate -disk  (name)

Any help is appreciated...

Thanks

Netapp Newbie.

3 REPLIES 3
Highlighted

Re: ONTAP 8.3 Replaced drives Firmware Update

I'm assuming that the new drive has a newer firmware than the rest of them? 

 

Highlighted

Re: ONTAP 8.3 Replaced drives Firmware Update

My apologies. The new drives firmware is actually older. 

Highlighted

Re: ONTAP 8.3 Replaced drives Firmware Update

I would first update your DQP - https://mysupport.netapp.com/NOW/download/tools/diskqual/    see if that helps.   

 

I would also think about updating to the latest firmware - https://mysupport.netapp.com/NOW/cgi-bin/diskfwmustread.cgi/download/tools/diskfw/bin/all  

 

There's no downtime,  it will pull disks out one at a time from the raidgroups and update the firmware.    

 

You can also do the shelf firmware too at this time.   

View solution in original post

Check out the KB!
Knowledge Base
All Community Forums