ONTAP Discussions

Replace SATA 3TB disks by 8TB NL-SAS is possible?

ANTONIO_SANTOS
2,302 Views

Hi guys,

 

  The customer has a FAS8080 with some X308 3TB disks, but haven´t any more spares. On the same cluster, he has a FAS9000 with X318 8TB disks and many spares. The doubt is: can I use X318 disks to replace X308 on shelves DS4246? The ONTAP version is 9.1P1.

 

Thank you in advance!

1 ACCEPTED SOLUTION

Mjizzini
2,169 Views

As long as you will create a new aggregate/RAID groups from the inserted disks, you should be fine. 

 

View solution in original post

3 REPLIES 3

TMACMD
2,288 Views

If ontap uses a larger drive to rebuild into the larger drive effectively becomes the same size as the smaller drive. It right sizes the larger capacity drive to be that if the lower capacity drive

ANTONIO_SANTOS
2,279 Views

Thank you TMAC_CTG for your answer, but my doubt is about compatibility on put these two types of disks (NL-SAS and SATA) on the same disk shelf.

Mjizzini
2,170 Views

As long as you will create a new aggregate/RAID groups from the inserted disks, you should be fine. 

 

Public