SnapProtect adding a new tape drive?

[M_Stubbs]

Hi,

Recently installed an extra 2 tape drives in  Overland 4000 series via FC, I know zoning is fine as from the FAS controllers we can now see the extra 2 tape drives. Problem is SnapProtect is still only seeing the 2 original drives.

Can any one advise which steps need to be followed to get Snap Protect to see the extra 2 drives inthe Overloand?

Mike S

[jskinner]

Hi Mike,

Did you run the library & drive configuration for NDMP devices after adding them to the controller?

The steps are here:

http://docs.snapprotect.com/english_us/features/nas_lib/nas_library_drive_configuration.htm