ONTAP Discussions

Systemshell - cant ssh to filer after systemshell session left open

dannyd103
6,708 Views

Hi,

 

I am unable to ssh to a filer after accidentally leaving the systemshell logged in.

 

Ontap version is 8.1.4P6

 

Unlocked diaguser:

 

priv set advanced

useradmin diaguser unlock

useradmin diaguser password

******

systemshell

diag

******

 

and then hit ctrl-D rather than typing 'exit' first.

 

I am unable to access the filer via SSH or telnet since.

 

I was hoping that the session would time out but I've left it overnight and no joy 😞

 

P.S Yes I know I should'nt be playing with the system shell 😛

 

Any ideas without reboot/takeover?

3 REPLIES 3

ekashpureff
6,700 Views

 

Danny -

 

Some lessons we have to learn the hard way - don't do that !

 

: )

 

Use the console connection ... ?

Or the SP ?

 


I hope this response has been helpful to you.

At your service,

Eugene E. Kashpureff, Sr.
Independent NetApp Consultant http://www.linkedin.com/in/eugenekashpureff
Senior NetApp Instructor, IT Learning Solutions http://sg.itls.asia/netapp
(P.S. I appreciate 'kudos' on any helpful posts.)

dannyd103
6,694 Views

Managed to get in, phew.

 

Had to get access to the systemshell prompt non-interactively:

 

ssh user@filer "priv set advanced; systemshell"

 

Log in using user "diag"

 

then ps -ef to identify the hung session

 

kill -9 to terminate it

 

🙂

netapplem
4,321 Views

I had this issue and was just successful in releasing the systemshell session.  

 

I logged into the system via the sp and then did a "system console" to get access to the system.  Unlocking and setting the password to diag user via the advanced privileged commands were done so that I could access the systemshell.

 

Here is a copy of my log, I will explain what I did under the output:


fas01*> systemshell

Data ONTAP/amd64 (fas01) (pts/1)

login: diag
Password:
Last login: Wed Jul 19 16:01:25 from localhost


WARNING:  The system shell provides access to low-level
diagnostic tools that can cause irreparable damage to
the system if not used properly.  Use this environment
only when directed to do so by support personnel.

fas01% ps -ef
  PID  TT  STAT      TIME COMMAND
83586   1  S      0:00.01 USER=diag LOGNAME=diag HOME=/var/home/diag SHELL=/bin
83591   1  R+     0:00.00 USER=diag LOGNAME=diag HOME=/var/home/diag SHELL=/bin
fas01% sudo ps -ef
  PID  TT  STAT      TIME COMMAND
 3474 rlm  Is+    0:00.00 TERM=vt100 login /dev/console (ontaplogin)
 3472 con  Is+    0:00.01 TERM=vt100 login /dev/cuacons.auth (ontaplogin)
 3473 sp.  Ss+    0:20.00 TERM=vt100 login /dev/cuasp.auth (ontaplogin)
82943   0  Is+    0:00.01 TERM=xterm login
83585   1  Ss     0:00.01 TERM=xterm login [pam] (login)
83592   1  R+     0:00.00 HOME=/var/home/diag MAIL=/var/mail/diag PATH=/sbin:/b
fas01% sudo ps -ef
  PID  TT  STAT      TIME COMMAND
 3474 rlm  Is+    0:00.00 TERM=vt100 login /dev/console (ontaplogin)
 3472 con  Is+    0:00.01 TERM=vt100 login /dev/cuacons.auth (ontaplogin)
 3473 sp.  Ss+    0:20.09 TERM=vt100 login /dev/cuasp.auth (ontaplogin)
82943   0  Is+    0:00.01 TERM=xterm login
83585   1  Is     0:00.01 TERM=xterm login [pam] (login)
83593   1  R+     0:00.00 HOME=/var/home/diag MAIL=/var/mail/diag PATH=/sbin:/b
fas01% exit
logout
fas01*> systemshell

Data ONTAP/amd64 (fas01) (pts/1)

login: diag
Password:

Last login: Wed Jul 19 17:04:03 from localhost


WARNING:  The system shell provides access to low-level
diagnostic tools that can cause irreparable damage to
the system if not used properly.  Use this environment
only when directed to do so by support personnel.

fas01% sudo ps -ef
  PID  TT  STAT      TIME COMMAND
 3474 rlm  Is+    0:00.00 TERM=vt100 login /dev/console (ontaplogin)
 3472 con  Is+    0:00.01 TERM=vt100 login /dev/cuacons.auth (ontaplogin)
 3473 sp.  Ss+    0:20.33 TERM=vt100 login /dev/cuasp.auth (ontaplogin)
82943   0  Is+    0:00.01 TERM=xterm login
83602   1  Ss     0:00.01 TERM=xterm login [pam] (login)
83608   1  R+     0:00.00 HOME=/var/home/diag MAIL=/var/mail/diag PATH=/sbin:/b
fas01% sudo kill -9 82943
fas01%

I logged into the system shell and ran a "ps -ef" and was only able to see current session.

Next I ran a "sudo ps -ef" to see all processes running.

I ran the "sudo ps -ef" a couple times to see if any changes presented itself and what stayed.

The TT column showed "rlm", "con", and "sp."  I felt that it would not be any of these sessions.  So I ignored them.

I was interested in PID 82943 and 83585.  At this point I logged out of the systemshell and logged back in.

Again seeing that PID 82943 was still there, I attempted to kill the process.

Killing the process was unsuccessful as myself (obviously), so I performed the "sudo kill -9 82943".

I then attempted to log in via SSH to the system and was successful for the first time in hours.


I hope this helps someone else.

Public