what if the protocol used for LUN was ISCSI and i wish to change it to FC. I tried changing the protocol using OnCommand System Manager but No good. Are there changes required? Like ,
1.Creating New LUN and Migrate files from the Old LUN2.From System Manager , Choose FC as protocol
Create a new igroup for FC, and add the hosts FC WWPNs to the new igroup.
Then unmap the lun from the old iSCSI igroup, and map it to the new FC igroup.
I will try this and give you an Update. Thanks!
Let's walk you through the new & improved Knowledge Base and further enrich your experience with NetApp Products.
Join our Discord Community