Simulator Discussions

Highlighted

About Simulator cDot 8.2 Licenses show

Hello Support

 

I have a problem about cDot 8.2 Licenses add question.

After add license use the  license add -license-code command to add license and use license show /license status show check the flowing result .

yongl::> version

NetApp Release 8.2.1 Cluster-Mode: Fri Mar 21 14:25:07 PDT 2014

yongl::> license add -license-code

  <License Code V2>           License Code V2

yongl::> license add -license-code CAYHXPKBFDUFZGABGAAAAAAAAAAA

  (system license add)

License for package "CIFS" and serial number "1-81-0000000000000004082368511" installed successfully.

(1 of 1 added successfully)

yongl::> license status show

  (system license status show)

Package            Licensed Method  Expiration

-----------------  ---------------  --------------------

Base               license          -

NFS                none             -

CIFS               none             -

iSCSI              none             -

FCP                none             -

CDMI               none             -

SnapRestore        none             -

SnapMirror         none             -

FlexClone          none             -

SnapVault          none             -

SnapLock           none             -

SnapManagerSuite   none             -

SnapProtectApps    none             -

V_StorageAttach    none             -

SnapLock_Enterprise

                   none             -

Insight_Balance    none             -

16 entries were displayed.

 

Now I have not to license about cifs successful.

would you please give a solution to resolve it.

 

13 REPLIES 13
Highlighted

Re: About Simulator cDot 8.2 Licenses show

Sounds like you entered a valid CIFS license but not for any of the nodes in your cluster. Enter your cluster and/or node serial numbers in the support site and confirm. 

Highlighted

Re: About Simulator cDot 8.2 Licenses show

Hello CHRISMAKI

 

This is simulator, and the serial numbers all is same.

One is Serial Number: 1-80-000011

and a other one is

Serial Number: 1-81-0000000000000004082368511.

 

And other same Serial Number simulator ONTAP can use same license to registry normal.

 

You can use ssh to access 10.128.142.120 to check it.

user: admin

Password: P@ssw0rd

Highlighted

Re: About Simulator cDot 8.2 Licenses show

Since I'm not internal to NetApp I am unable to login to that IP, I did however look up the licenses here and the appropriate one is actually:

 

KUUNCAFTVDDCMAXAGAAAAAAAAAAA

Not the one you entered.

Re: About Simulator cDot 8.2 Licenses show

It is still not work.

 


yongl::> license add -license-code KUUNCAFTVDDCMAXAGAAAAAAAAAAA
(system license add)
License for package "CIFS" and serial number "1-81-0000000000000004079432753" installed successfully.
(1 of 1 added successfully)


yongl::> license status show
(system license status show)
Package Licensed Method Expiration
----------------- --------------- --------------------
Base license -
NFS none -
CIFS none -
iSCSI none -
FCP none -
CDMI none -
SnapRestore none -
SnapMirror none -
FlexClone none -
SnapVault none -
SnapLock none -
SnapManagerSuite none -
SnapProtectApps none -
V_StorageAttach none -
SnapLock_Enterprise
none -
Insight_Balance none -
16 entries were displayed.

yongl::>

Highlighted

Re: About Simulator cDot 8.2 Licenses show

Do not you need base cluster license first?

Highlighted

Re: About Simulator cDot 8.2 Licenses show

the Base license was registed 

 

yongl::smileyembarrassed: license status show
(system license status show)
Package Licensed Method Expiration
----------------- --------------- --------------------
Base license -

Highlighted

Re: About Simulator cDot 8.2 Licenses show

Since you used some other CIFS license, it's likely you used the improper Base license as well, try applying the following Base license:

 

SMKQROWJNQYQSDAAAAAAAAAAAAAA

Which should change your cluster serial and make CIFS work.

Highlighted

Re: About Simulator cDot 8.2 Licenses show

What's the status of this issue? 

Highlighted

Re: About Simulator cDot 8.2 Licenses show

 

Run this command:

system node show -fields node,systemid,serialnumber

 

have a look at the serial numbers in the output, and intall the licenses for those serial numbers.

 

 

Highlighted

Re: About Simulator cDot 8.2 Licenses show

KQROWJNQYQSDAAAAAAAAAAAAAA still not work.

yongl::> license add -license-code SMKQROWJNQYQSDAAAAAAAAAAAAAA
(system license add)
License for package "Base" and serial number "1-80-000008" installed successfully.
(1 of 1 added successfully)

Notice: Base license is changed. Cluster serial number is 1-80-000008


yongl::> license status show
(system license status show)
Package Licensed Method Expiration
----------------- --------------- --------------------
Base license -
NFS none -
CIFS none -
iSCSI none -
FCP none -
CDMI none -
SnapRestore none -
SnapMirror none -
FlexClone none -
SnapVault none -
SnapLock none -
SnapManagerSuite none -
SnapProtectApps none -
V_StorageAttach none -
SnapLock_Enterprise
none -
Insight_Balance none -
16 entries were displayed.

yongl::>

Highlighted

Re: About Simulator cDot 8.2 Licenses show

yongl::> system node show -fields node,systemid,serialnumber
node serialnumber systemid
-------- ------------ ----------
yongl-01 1012142121 4233367593
yongl-02 1012142122 4233367594
2 entries were displayed.

 

I do not confirmed the license by above serialnumber from http://mysupport.netapp.com/NOW/download/tools/simulator/ontap/8.2.1/CMode_licenses_8.2.1GA.txt

but in a nother simulator, the same version and use the same way can registry license OK by above link.

 

hongboy::> system node show -fields node,systemid,serialnumber
node serialnumber systemid
---------- ------------ ----------
hongboy-01 1012142141 4233367613
hongboy-02 1012142142 4233367614
2 entries were displayed.

hongboy::> license status show
(system license status show)
Package Licensed Method Expiration
----------------- --------------- --------------------
Base site -
NFS site -
CIFS site -
iSCSI site -
FCP none -
CDMI none -
SnapRestore site -
SnapMirror site -
FlexClone site -
SnapVault site -
SnapLock none -
SnapManagerSuite none -
SnapProtectApps none -
V_StorageAttach none -
SnapLock_Enterprise
none -
Insight_Balance none -
16 entries were displayed.

hongboy::> version
NetApp Release 8.2.1 Cluster-Mode: Fri Mar 21 14:25:07 PDT 2014

Highlighted

Re: About Simulator cDot 8.2 Licenses show

Cool.  There is the problem.

 

The first license you tried was for 4082368511, and the 2nd was for 4079432753.  You need the keys for 4233367593 and 4233367594.

 

Most of us would have to rebuild using node serials from the keys on the download page, but you appear to be internal so you've probably got better options.  

If these nodes were built with an internal tool i'd imagine appropriate keys should be available to you.  If you built them by hand and just made up those node serials you'll have to drum up eval keys.

 

The keys really do have to match.  Can't say why they would work on your other sim pair.  They really shouldn't, and don't match the license type shown in your output.

 

Your hongboy sim pair has site licenses installed, but the keys on the download page are node-locked licenses.

license show -instance on the hongboy sim would probably confirm that.  Just whatever you do, don't post a site license key in an open forum.

 

 

 

 

 

Highlighted

Re: About Simulator cDot 8.2 Licenses show

Thanks for your explain.

 

I had confirm a nother simulator, that show

 

cluster4::> system node show -fields node,systemid,serialnumber
node serialnumber systemid
----------- ------------ ----------
cluster4-01 4082368511 4082368511
cluster4-02 4082368511 4082368511
2 entries were displayed.

cluster4::> version
NetApp Release 8.2.1 Cluster-Mode: Fri Mar 21 14:25:07 PDT 2014

 

As your said I need license for 4233367593 and 4233367594.

 

Thank you again.

Check out the KB!
Knowledge Base
All Community Forums