Can I remove working aggr disk?

[shypervisor]

I want to add disk to vol0. At this  moment, storage pool have no disks.

For this purpose, I want to get disk from another aggrgate.

Is it available?

From seeing the NetApp document, failed disk is written but I cannot found working disk.

[ttran]

Hello Shypervisor,

As you can see from the error message posted in your screenshot, you cannot shrink the size or number of disks once added to an aggregate without degrading the aggregate. The only way to move a disk from an existing aggregate is to first fail a disk from the working aggregate, manually unfail the desired disk, zero the disk, then add it to the desired aggregate. Again, keep in mind that the disk you removed from the existing aggregate will cause the aggregate to now be degraded.

The command  "storage pool show" is specifically for Storage Pools, which is a performance-enhancing feature and you need to use the command "storage disk show" to view disks and specifically "storage disk show -spare" to view the available spares in a Cluster. From the error in your output, it appears you do not have two available spares to add.

Here is reference documentation that provides more details for the "storage disk" command: 

Storage Disk Command Reference 

Storage Disk Show Command Reference 

Here is more information on "Storage Pool":

Storage Pool 

Regards,

Team NetApp

[liu]

The error shows that you have no available disks to add to the root aggregate you can run the storage disk show-spare command to check it Check whether there are enough disks in the pool
Adding disks to the root aggregate is not recommended. Once added, disks cannot be removed withoutre-initializing the node.

storage aggregate show-spare-disks