OCUM 6.x API to refresh storage systems

[JGPSHNTAP]

Basically title says it all.. I'm just curious invoking a storage discover via API quickly as i'm doing some testing on building volumes with WFA, so in order to prevent me from having to keep clicking the interfaces, I was hoping I can write something really quickly

[ekashpureff]

JGPSH -

Looking through in ZExplore I don't find anything in the DFM 5.2 or 6.0 APIs to do this.

I haven't looked at 6.x, but the auto discovery option in earlier versions of OCUM allowed for periodic re-scan of the network for new storage systems.

I hope this response has been helpful to you.

At your service,

Eugene E. Kashpureff, Sr.
Independent NetApp Consultant http://www.linkedin.com/in/eugenekashpureff
Senior NetApp Instructor, IT Learning Solutions http://sg.itls.asia/netapp
(P.S. I appreciate 'kudos' on any helpful posts.)

[sinhaa]

See my post here: http://community.netapp.com/t5/OnCommand-Storage-Management-Software-Discussions/WFA-Commands-to-Refresh-Cluster-managed-by-OCUM-6-X-and-Acquire-the-O...

I have  Refresh Cluster Command in the Dar file. If you don't wnat to use WFA, then see the command code. It tells what APIs to call.

sinhaa