About RPHELANIN

RPHELANIN · ‎2015-08-10

Whats the replication schedule? Deszwilling may not have completed between mirrors...

RPHELANIN · ‎2015-08-10

Adding a vlan does not bring interfaces down. It looks liek you are using an unspported SFP+ module SGD_ST001a> Thu Aug 6 14:49:08 KST [SGD_ST001a:netif.sfpNotSupported:error]: The SFP+ module (FINISAR CORP. FTLX8571D3BCL ) installed in e1a is not supported with this network interface.

RPHELANIN · ‎2015-08-10

I'm afraid you can't do this. The easiest way is to create an SVM on your old domain, transition the data then Snapmirror to SVM on new domain.

RPHELANIN · ‎2015-07-30

Can you view them from previous Autosupports on MyAustosupport - bit a guess..

RPHELANIN · ‎2015-07-30

Whats the controller model? Going from 8.1 to 8.2 on the entry \ some mid level controllers will have a performance impact

RPHELANIN · ‎2015-07-24

Access the qtree from a windows host and the effective security style shuold change to ntfs. the effective style is set from the last client that aceess the vol\qtree\file

RPHELANIN · ‎2015-07-23

maybe delete the peer relationship?

RPHELANIN · ‎2015-07-23

You need to set snapmirror to off so they the relationships dont start updating during your uprgrade work. All you need to do is quiese, update and once the update is complete turn off snapmirror on source and destination.

RPHELANIN · ‎2015-07-23

if this is simulator have a look at the Time Settings on the ESXi host and then ssh to the ESXI host and run the date command and verify they are the same. If the are different the simulator is most liley picking up the incorrect time.

RPHELANIN · ‎2015-07-23

system node run -node * -command options snapmirror.enable off

RPHELANIN · ‎2015-07-21

pretty sure you can as protocl version is dtermeined upon mount operation.

RPHELANIN · ‎2015-06-30

hi, can you send me your perl script?

RPHELANIN · ‎2015-06-30

hi, the cusomter is currently using EMC so its not a 7 mode tranisition. When i was presenting cDOT one of the guys asked me does he ahve to manually create a qtree for each home directory.

RPHELANIN · ‎2015-06-30

Hi All, I need to create about 5000 home directories. Whats the ebst way to do so? I know i can create dynamic share names with %w, but can i dynamically create the necessary qtrees for each individual user?

RPHELANIN · ‎2015-04-14

this is a good start http://www.datacenterdan.com/blog/netapp-dataontap-83-adp-root-disk-slice-deep-dive

RPHELANIN · ‎2015-04-14

ontap 8.3 does not exist for 7 mode, only cDOT the latest release for 7 mode is 8.2.3. 7 mode is no longer being developed so for that reason alone you should install cDOT with ontap 8.3 you can take advantage of ADP which will give you more usable capacity than 8.2

RPHELANIN · ‎2015-04-14

you will need to download hte disk qual package seperately and copy it to the filer. Also did you run upgrade advisor as you may have disks that need their firmware upgraded prior to the ontap image upgrade

RPHELANIN · ‎2014-07-22

It all about LIF's now and what ports they get assigned to e0a and e0c are reuqired for intercluster swithces e0b and e0d are for data access, cluster mgmt, replication etc as this is simulation and swithcing was done on the esxi host i didnt really break them up, I just created the LIFs and assigned them to a port

RPHELANIN · ‎2014-07-22

Netapp 8000 supports iSCSI. see here at Storage Networking Supported http://www.netapp.com/us/products/storage-systems/fas8000/fas8000-tech-specs.aspx

RPHELANIN · ‎2014-07-22

hi i would start by checking for these alerts FCP PARTNER PATH MISCONFIGURED. this link here will help https://kb.netapp.com/support/index?page=content&id=3010111 you may need to run test on your ISL between sites too.

RPHELANIN · ‎2014-07-22

Each vsim requires 4 nic's. You can create a cluster and add nodes in but you wont be able to configure them HA. Not the end of the world but you wont be able perform any storage failovers When i rolled out my vsim i used vsphere but for some reason i had to use the vmware worksation licenses so i fyou add licenses and cannot enbale services could be that - just a heads up

RPHELANIN · ‎2014-07-21

The replacement disk could be faulty run command aggr status -f from the node that owns the disk and confirm. Also check for an amber light on the disk It could also be that your disk qual is not up to date

RPHELANIN · ‎2014-06-10

hi all has anyone got the link to download the toolkit? All download links lead me to the the discussion homepage - no download link as registered partner

RPHELANIN · ‎2014-05-27

did you try by IP and root credentials?

RPHELANIN · ‎2014-05-22

Scot, spun a new VM and promoted it to DC and then added my cifs vserver. thanks for hte help

Re: performance issue with snapmirror and snapshots on target aggregate

Re: How to avoid network disconnection for the adding a vlan?

Re: 7mtt transition from one domain to another

Re: Recover Snapvault Snap Sched Settings

Re: Post Netapp DOT Upgrade Performance Issue

Re: changing effective security style on folders in qtree

Re: Temporary stop of snapmirror in CDOT

Re: SNapmirror and Upgrade ONtap

Re: CIFS server can't join AD

Re: Temporary stop of snapmirror in CDOT

Re: Activate NFS4

Re: Home directories

Re: Home directories

Home directories

Re: advise vmware fas2520 dual controller 7-mode vs cluster mode

Re: advise vmware fas2520 dual controller 7-mode vs cluster mode

Re: Trying to access ETC$ as CIFS shares to Copy Ontap Upgrade Image

Re: Basic Question about setting up a cDOT simulator

Re: NetApp NetApp FAS8000 Series

Re: High FC latency

Re: Basic Question about setting up a cDOT simulator

Re: BSAS Spare Disk firmware version showing "4321"

Download Link

Re: SnapDrive cannot connect to a disk from another DOMAIN NetApp

Re: cannot create CIFS vserver