Hi all,
I installed/configured Harvest on RHEL 6.6, everything works fine except I could not export the dashboads. Here is the error:
[root@ICPLPA06 log]# /opt/netapp-harvest/netapp-manager -import
[OK ] Will import dashboards to http://10.125.10.130:443
[OK ] Imported dashboard [db_netapp-detail-harvest-poller.json] successfully
[OK ] Imported dashboard [db_netapp-detail-network-lif.json] successfully
[ERROR ] Failed to import dashboard [db_netapp-detail-7-mode-lun.json] due to error: 500 write failed: Connection reset by peer
[ERROR ] -Response was :500 write failed: Connection reset by peer --> we have a cluster with six nodes (2 FAS8040 and FAS8020)
We have not a 7mode.
In grafana we can not see the dashboard.
In graphite is collecting data from OCUM (They are capacity data) But the performance data that Harvest collects are not being updated.
I attached a pics of Grafana.
Configuration netapp-harvest.conf:
[root@ICPLPA06 netapp-harvest]# cat netapp-harvest.conf
##
## Configuration file for NetApp Harvest
##
## Create a section header and then populate with key/value parameters
## for each system to monitor. Lines can be commented out by preceding them
## with a hash symbol ('#'). Values in all capitals should be replaced with
## your values, all other values can be left as-is to use defaults
##
## There are two reserved section names:
## [global] - Global key/value pairs for installation
## [default] - Any key/value pairs specified here will be the default
## value for a poller should it not be listed in a poller section.
##
##
## Global reserved section
##
[global]
grafana_api_key = eyJrIjoiYXhDNktrQTJqMzhGd3ZmOUJkNVRnN01vMmhrczdBMjQiLCJuIjoibmV0YXBwLWhhcnZlc3QiLCJpZCI6MX0=
grafana_url = http://10.125.10.130:443
grafana_dl_tag =
##
## Default reserved section
##
[default]
#====== Graphite server setup defaults ========================================
graphite_enabled = 1
graphite_server = ICPLPA05
graphite_port = 2003
graphite_proto = tcp
normalized_xfer = mb_per_sec
normalized_time = millisec
graphite_root = default
graphite_meta_metrics_root = default
#====== Polled host setup defaults ============================================
host_type = FILER
host_port = 443
host_enabled = 1
template = default
data_update_freq = 60
ntap_autosupport = 0
latency_io_reqd = 10
auth_type = password
username = netapp-harvest
password = netapp00
ssl_cert = netapp-harvest.pem
ssl_key = netapp-harvest.key
##
## Monitored host examples - Use one section like the below for each monitored host
##
#====== 7DOT (node) or cDOT (cluster LIF) for performance info ================
#
[CLOALMPCDOT01]
hostname = 10.125.1.72
site = cloud
#====== OnCommand Unified Manager (OCUM) for cDOT capacity info ===============
#
[cloapa01]
hostname = 10.125.10.186
site = cloud
host_type = OCUM
data_update_freq = 900
normalized_xfer = gb_per_sec
I need your help!!
Best Regards,
Jorge
