Hi All,
Please can someone help with this? In one command e0d and e0f are down and in another they are up. Evidently they are down even after issueing the command - net port modify -node xxxxx -port e0d -up-admin. I need to get the ports up.
xxxxx::*> net port ifgrp show -node xxxx -ifgrp a0a
(network port ifgrp show)
Node: xxxx
Interface Group Name: a0a
Distribution Function: ip
Create Policy: multimode_lacp
MAC Address: yyyyyyyyyyyyyyyyyyy
Port Participation: none
Network Ports: e0d, e0f
Up Ports: -
Down Ports: e0d, e0f
xxxxx::*> net port show -node xxxx
(network port show)
Node: xxxx
Ignore
Speed(Mbps) Health Health
Port IPspace Broadcast Domain Link MTU Admin/Oper Status Status
--------- ------------ ---------------- ---- ---- ----------- -------- ------
a0a Default - down 1500 auto/- - false
a0a-211 Default 136.171.211.0/24 down 1500 auto/- - false
e0M Default 136.171.211.0/24 up 1500 auto/100 healthy false
e0a Default - down 1500 auto/10 - false
e0b Default - down 1500 auto/10 - false
e0c Cluster Cluster up 9000 auto/10000 healthy false
e0d Default - up 1500 auto/10000 healthy false
e0e Cluster Cluster up 9000 auto/10000 healthy false
e0f Default - up 1500 auto/10000 healthy false
e7a Default - down 1500 auto/10 - false
e7b Default - down 1500 auto/10 - false
