Hello,
Since we upgraded to ONTAP 8.1.4 7-mode we have these messages in console.
arp: writing to routing socket: File exists
They don't appear in the messages log file but only in console. Seems that it comes from the ACP upgrade Fwd.
As anyone had the same ?
ACP is working well:
Alternate Control Path: Enabled
Ethernet Interface: e4b
ACP Status: Active
ACP IP Address: 192.168.0.123
ACP Subnet: 192.168.0.0
ACP Netmask: 255.255.252.0
ACP Connectivity Status: Full Connectivity
Shelf Module Reset Cnt IP Address FW Version Module Type Status
----------------- ------------ --------------- ------------ ------------ -------
1a.00.A 000 192.168.2.219 01.41 IOM3 active
1a.00.B 000 192.168.2.229 01.41 IOM3 active
1a.01.A 000 192.168.3.231 01.41 IOM3 active
1a.01.B 000 192.168.0.216 01.41 IOM3 active
1a.02.A 000 192.168.1.61 01.41 IOM3 active
1a.02.B 000 192.168.2.33 01.41 IOM3 active
1a.03.A 000 192.168.0.82 01.41 IOM3 active
1a.03.B 000 192.168.0.115 01.41 IOM3 active
1a.04.A 000 192.168.0.168 01.41 IOM3 active
1a.04.B 000 192.168.0.231 01.41 IOM3 active
Regards
Jerome
