Slowness Accessing Knowledge Base
We are currently experiencing slow responses when accessing Knowledge Base articles directly and through Elio. Thank you for your patience while we work on resolving the issue.

Simulator Discussions

NetApp 7-Mode fpolicy error - n attempt to connect to fpolicy server for policy failed [0xc00000b5]

VARONISSYSTEMS
3,382 Views

Hi guys,

Need, help.

Getting following error constantly from fpolicy on 7 mode simulator against windows 2012 server. 

Checked DNS, GPO named pipes set to ntapfprq. 

ontap - NetApp Release 8.1X47 7-Mode: Fri Mar 23 16:56:50 PDT 2012

Windows - Windows Server 2012 R2 Standard.

 

NTAP> Tue Oct 30 20:44:00 IST [NTAP:cifs.server.infoMsg:info]: CIFS: Warning for server: Connection terminated.
Tue Oct 30 20:44:00 IST [NTAP:cifs.server.errorMsg:error]: CIFS: Error for server : Error while negotiating protocol with server STATUS_IO_TIMEOUT.
Tue Oct 30 20:44:00 IST [NTAP:fpolicy.fscreen.server.connectError:error]: FPOLICY: A.
Tue Oct 30 20:44:00 IST [NTAP:fpolicy.fscreen.server.droppedConn:warning]: FPOLICY: File policy server for fscreen policy Varonis has disconnected from the filer.
Tue Oct 30 20:44:00 IST [NTAP:fpolicy.fscreen.server.connectedNone:warning]: FPOLICY: File policy Varonis (file screening) is enabled but no servers are connected to perform file screening for this policy.

1 ACCEPTED SOLUTION

Rhunton
2,536 Views

Hi Guys,

I had this error recently and worked my way through the problem.

It boils down to the 7-mode filers were trying and establish a connection with the 2012 R2 server using SMBv1, this isn't enabled in 2012 R2 by default and I didn't want to enable it as we know SMBv1 is a security risk.

 

The soulution for me was on the 7-Mode filers I have to enable the following option.

options cifs.smb2.client.enable on

 

Once I enabled the fpolicy feature was able to communucate back to our auditing server straigt away.

 

Hope this helps.

Regards

Rob Hunton

View solution in original post

2 REPLIES 2

Quake
2,727 Views

Hello,

 

Do you find a solution at your issue ?

Because I have the same problem and I don't find anything to fix it .

 

Best regards,

 

Quake.

Rhunton
2,537 Views

Hi Guys,

I had this error recently and worked my way through the problem.

It boils down to the 7-mode filers were trying and establish a connection with the 2012 R2 server using SMBv1, this isn't enabled in 2012 R2 by default and I didn't want to enable it as we know SMBv1 is a security risk.

 

The soulution for me was on the 7-Mode filers I have to enable the following option.

options cifs.smb2.client.enable on

 

Once I enabled the fpolicy feature was able to communucate back to our auditing server straigt away.

 

Hope this helps.

Regards

Rob Hunton

Public