how to remove the port from Cluster Broadcast Domain

[AllenChang]

I use  the simulator 9.8

I add the to port to simulator before the simulator first boot,

When the simulator first boot ,

there are only two port (e0a and e0b) been add to Cluster Broadcast Domain

the e0c,e0d,e0e and e0f still in Default Broadcast Domain

but when the cluster been create,

the e0d,e0e and e0f been add to Cluster Broadcast Domain

Is any body meet this situation ?

How to remove the port from Cluster Broadcast Domain?

Please Help

[Ontapforrum · Accepted solution]

Try using this command:
::>network port broadcast-domain remove-ports

https://docs.netapp.com/us-en/ontap/networking/add_or_remove_ports_from_a_broadcast_domain97.html#examples-of-adding-and-removing-ports

This is another kb, haven't tried but you can give it a go  (as you are working on simulator)
https://kb.netapp.com/Advice_and_Troubleshooting/Data_Storage_Software/ONTAP_OS/How_to_move_a_port_from_one_broadcast-domain_to_another_broadcast-doma...

[AllenChang]

I have already try it

but it will not allow me to remove

[Ontapforrum]

What is the error ? could you share the commands/screenshot.

[Ontapforrum]

Sorry, I didn't see that you are adding 'additional ports' to the simulator ?

Check out these..

https://community.netapp.com/t5/Simulator-Discussions/9-9-1-Ontap-Simulator/m-p/431321#:~:text=Hi%20mmargolis26%2C%20Just%20adding%20this%20for%20othe....

https://community.netapp.com/t5/Simulator-Discussions/Add-more-network-interfaces-to-simulator/m-p/28268

[Ontapforrum]

Ok, tried in my simulator 9.10, and surprisingly it worked.

1) I have a already working simulator (Default 4 ports :2 Cluster & 2 default 1500mtu).
2) VMware workstation | Settings | Add 'Network Adapter'
3) ::> reboot (simulator)
4) Once it booted up, logged in and checked: network port show (It showed up as e0e)

5) added to to the default broadcast domain

6) Created a LIF on e0e.