VMware Solutions Discussions
VMware Solutions Discussions
Hello,
i have a problem with my VSC-Configuration. I will backup my virtual maschines with vsc. I have installed the plugin, and it works, i can connect to the netapp filer.
But when i start a backup, comes the errormessage:
SERVICE_UNAVAILABLE
RequestURI=/smvi/gwtrpc
I hope, someone can help me
Greetz
Stefan
I have the same problem, did you find a solution?
regards
Chris
Hi Chris-topher,
Please check the proxy-server settings of iExplorer.. It's possible that you need to introduce Server IP for local adressess.
Regards.
I have the same problem when I try to access the "Backup and Recovery" tab. Is there a solution?
Hello,
I've a workarround
open taskmanager on VC
select both java processes responsible for VSC an kill them
the java processes restart automaticly an rebuild the entrys in
C:\Windows\System32\config\systemprofile\AppData\Local\Temp
wait 1 minute and restart vcClient
Regards
Adam
I have this exact error. Tried killing java procceses, rebooted vCenter server, still having the issue
Update: VMWare Support recommened uninstalling/reinstalling VSC, that did the trick.
I have the same Problem, anybody found a Solution, i tried already uninstalling/reinstalling VSC on different machines. Regards Jo
Hello *,
Update:
In my case was the error a VSC installation on a vSphere Client.
After uninstall from the Client and VC.
And reinstall on VC and only on VC - it works fine.
1. If vCenter is open close it.
2. Stop your two NetApp VSC services (should say something like "NetApp for vSpher.....")
3. Locate the \crash directory and delete it.
4. Restart your VSC services
5. Open vCenter and you should be able to get to your console.
it works for me
I had the exact same issue with VSC 4.1 (vSphere 5.1) after I already configured and completed a successful test backup.
I stopped the services as described (Netapp SnapManager for Virtual Infrastructure and Virtual Storage Console for Vmware vSphere Server) and deleted the crash folder from C:\Program Files\NetApp\Virtual Storage Console\smvi\server\ and restarted the services.
Once I restarted.... the Backup and Recovery tab worked fine and showed my previous backup job properties.
Thanks!
Mark
SERVICE_UNAVAILABLE
RequestURI=/smvi/gwtrpc
We get same error message in ESXi 5.0 environment. VSC works fine to enable "recommended values" on ESXi hosts.
Every time "NetApp vSphere Plugin Framework" tries to connect to "NetApp SnapManager for Virtual Infrastructure" service over port 8043 for backup/restore purpose, we get the error above.
We tried to change SMVI port by following the instructions in the following KB. But there is no information about configuring the VSC plug-in to connect SMVI over newly defined port.
https://kb.netapp.com/support/index?page=content&id=1012836
Vcenter system configuration is below:
HP DL 380 G7, Microsoft windows server 2008 R2 enterprise, Vmware vcenter 5.0,VSC 2.1.2 x64.
The problem has been started after reinstalling the "VMware Vsphere Converter" to vCenter server.
We have removed "converter" and reinstalled VSC many times but result was not successful.
If VSC is installed to any other server, it works fine.
We have an open case about the issue but there is no resolution until now.