VMware Solutions Discussions

VSC Installed,now trying to use MBRscan and Align

STEVENJWILLIAMS83
3,944 Views

I have extracted the Host utilities to the datastore and on the ESXi host I navigate to the /opt/netapp/santools then try to run mbrscan and mbralign and it tells me they are not found....Help please.

/vmfs/volumes/935ccd64-e6d70c64/ISOs/netapp_esx_host_utilities_5_1/opt/netapp/santools # ls

NOTICE.TXT       config_mpath     esx_info_3x      san_version

brocade_info     config_mpath_3x  mbralign         sanlun

cisco_info       config_nfs       mbrscan          uninstall

config_hba       controller_info  mcdata_info

config_hba_3x    esx_info         qlogic_info

/vmfs/volumes/935ccd64-e6d70c64/ISOs/netapp_esx_host_utilities_5_1/opt/netapp/santools # mbrscan

-sh: mbrscan: not found

/vmfs/volumes/935ccd64-e6d70c64/ISOs/netapp_esx_host_utilities_5_1/opt/netapp/santools # mbralign

-sh: mbralign: not found

/vmfs/volumes/935ccd64-e6d70c64/ISOs/netapp_esx_host_utilities_5_1/opt/netapp/santools # sudo mbrscan

-sh: sudo: not found

/vmfs/volumes/935ccd64-e6d70c64/ISOs/netapp_esx_host_utilities_5_1/opt/netapp/santools # sudo mbralign -scan MWP_CADCAM.vmdk

-sh: sudo: not found

/vmfs/volumes/935ccd64-e6d70c64/ISOs/netapp_esx_host_utilities_5_1/opt/netapp/santools #

4 REPLIES 4

maness
3,944 Views

Did you try running the command like this: 

    ./mbrscan

Also, if that doesn't work, make sure the files have the executable bit set.

chmod +x *

STEVENJWILLIAMS83
3,944 Views

Nope.

/vmfs/volumes/935ccd64-e6d70c64/ISOs # cd netapp_esx_host_utilities_5_1/opt/netapp/santools

/vmfs/volumes/935ccd64-e6d70c64/ISOs/netapp_esx_host_utilities_5_1/opt/netapp/santools # ./mbrscan

Panic: Cannot determine full path of './mbrscan'/vmfs/volumes/935ccd64-e6d70c64/ISOs/netapp_esx_host_utilities_5_1/opt/netapp/santools # chmod +x *

/vmfs/volumes/935ccd64-e6d70c64/ISOs/netapp_esx_host_utilities_5_1/opt/netapp/santools # ./mbrscan

/vmfs/volumes/935ccd64-e6d70c64/ISOs/netapp_esx_host_utilities_5_1/opt/netapp/santools # /mbrscan

-sh: /mbrscan: not found

/vmfs/volumes/935ccd64-e6d70c64/ISOs/netapp_esx_host_utilities_5_1/opt/netapp/santools # mbrscan

-sh: mbrscan: not found

/vmfs/volumes/935ccd64-e6d70c64/ISOs/netapp_esx_host_utilities_5_1/opt/netapp/santools #

/vmfs/volumes/935ccd64-e6d70c64/ISOs/netapp_esx_host_utilities_5_1/opt/netapp/santools #

HUX20002000
3,944 Views

Steven,

I believe 'mbrscan' needs an argument, otherwise it'll just go straight back to a prompt with no output (which indicates that it did what was requested, i.e. nothing).

Try:

./mbrscan [path to a .vmdk file]

TDUBB1234
3,380 Views

I am getting same error. I uploaded the folder called

 

and extracted the utilities on my datastore

 

keep getting this error

 

/vmfs/volumes/4eeb732a-6a68c2bc-67db-782bcb44e4cf/netapp_esx_host_utilities_5_2.1/opt/netapp/santools # ./mbralign
Panic: Cannot determine full path of './mbralign'/vmfs/volumes/4eeb732a-6a68c2bc-67db-782bcb44e4cf/netapp_esx_host_utilities_5_2.1/opt/netapp/santools #
/vmfs/volumes/4eeb732a-6a68c2bc-67db-782bcb44e4cf/netapp_esx_host_utilities_5_2.1/opt/netapp/santools #
/vmfs/volumes/4eeb732a-6a68c2bc-67db-782bcb44e4cf/netapp_esx_host_utilities_5_2.1/opt/netapp/santools #
/vmfs/volumes/4eeb732a-6a68c2bc-67db-782bcb44e4cf/netapp_esx_host_utilities_5_2.1/opt/netapp/santools # ./mbralign --help
Panic: Cannot determine full path of './mbralign'/vmfs/volumes/4eeb732a-6a68c2bc-67db-782bcb44e4cf/netapp_esx_host_utilities_5_2.1/opt/netapp/santools #
/vmfs/volumes/4eeb732a-6a68c2bc-67db-782bcb44e4cf/netapp_esx_host_utilities_5_2.1/opt/netapp/santools #

Public