Effective December 3, NetApp adopts Microsoft’s Business-to-Customer (B2C) identity management to simplify and provide secure access to NetApp resources.
For accounts that did not pre-register (prior to Dec 3), access to your NetApp data may take up to 1 hour as your legacy NSS ID is synchronized to the new B2C identity.
To learn more, read the FAQ and watch the video.
Need assistance? Complete this form and select “Registration Issue” as the Feedback Category.

ONTAP Discussions

7MTT does not connect to configured LIF

thokelly

Hello,

 

I configured a migration project and added a new LIF in Networking, since you cannot chose an existing LIF.

But the snapmirror connection connects to a intercluster LIF (1 GBit) instead of the configured LIF (10Gbit) in an SVM where the volume goes.

 

I do not find any errors/failures in the logs.

 

Happens on both Clusters (its a MetroCluster).

When I testes my first projects, it used to work.

 

 

Any hints?

 

 

 

/Tom

 

1 ACCEPTED SOLUTION

SeanHatfield

You can choose which source IP(s) to use on the 7mode source systems, but it always uses the intercluster lifs on the destination cluster.   The lifs you create in a 7MTT project are data lifs on the destination SVM(s).  If 1gb is not enough for your snapmirror transfers then place those lifs on higher speed ports.  

 

If this post resolved your issue, help others by selecting ACCEPT AS SOLUTION or adding a KUDO.

View solution in original post

2 REPLIES 2

SeanHatfield

You can choose which source IP(s) to use on the 7mode source systems, but it always uses the intercluster lifs on the destination cluster.   The lifs you create in a 7MTT project are data lifs on the destination SVM(s).  If 1gb is not enough for your snapmirror transfers then place those lifs on higher speed ports.  

 

If this post resolved your issue, help others by selecting ACCEPT AS SOLUTION or adding a KUDO.

View solution in original post

peiffer83

I just completed a 7mtt migration.  I had a interface group which had my two 10gb connections in it (A0A).  I created another lif on these ports for intercluster.  For example:

 

A0A=e0g,e0f

 

Intercluster lif is configured on A0A.

 

Here is a guide:

https://library.netapp.com/ecmdocs/ECMP1547469/html/GUID-3E74D0DB-CA7D-437A-920C-CED37D55622F.html

 

Also if you have support they can help you with the 7MTT

 
Announcements
NetApp on Discord Image

We're on Discord, are you?

Live Chat, Watch Parties, and More!

Explore Banner

Meet Explore, NetApp’s digital sales platform

Engage digitally throughout the sales process, from product discovery to configuration, and handle all your post-purchase needs.

NetApp Insights to Action
I2A Banner
Public